The Vents 100 Style exhaust fan is equipped with an automatically closing front panel. When the fan is turned off, the front panel of the fan smoothly closes and blocks the exhaust duct. Equipped with bearings, has a low noise level.
Technical characteristics of the fan
| Parameter name | Value |
| Maximum productivity, m3/h | 97 |
| Consumption, W | 9 |
| Voltage , V | 220 |
| Current consumption, A | 0.059 |
| Impeller rotation speed, min-1 | 2165 |
| Sound pressure level at a distance of 3 m, dBA < /br> | 25 |
| Weight, kg | 0.55 |
| Protection class | IP 44 |
| Pipe size, mm | 100 |
Dimensions
| Dimensions | a | b | c | d < /td> | e |
| mm | 175 | 221 | 77 | 99 | 39 |
Fan features
- Used for exhaust ventilation of a bathroom, toilet, kitchen or other room.
- The successful combination of the design of the fan housing, impeller and the use of bearings made it possible to achieve very quiet operation of the fan and reduce consumption per hour to 9 W.
- When the fan is turned off, the exhaust duct is automatically closed. The front panel is equipped with a thermal actuator, which ensures smooth opening or closing.
- The motor uses rolling bearings, which reduces the noise level, increases the reliability and service life of the hood.
- The fan has a protection class of IP44, which allows it to be used in wet rooms. All electrical connections are protected by a sealed silicone cover
- For service cleaning, the fan unit can be easily removed from the pipe, as shown in the figure below
Turning on and off
The fan can be turned on:
- from a separate switch (not included in the delivery package)
- together with lighting
- from the RS-1-300 performance controller or the SPC-1 touch controller, which can also be used to regulate the hood’s performance. Using a regulator allows you to reduce the hood power and, at the same time, the noise level to a silent state.
All control devices are not included in the delivery package.
Connection diagram
Scheme for connecting the fan to an external separate switch or to a light switch.
Fan installation
The fan is designed for installation in the built-in exhaust duct of an apartment or house. Mounted directly with a pipe into the duct or through a small section of the air duct. The fan is axial and cannot be connected to a very long duct, this will reduce the performance and increase the noise level. The recommended length of the air duct is no more than 0.5 meters. It is also recommended to avoid turning the duct whenever possible, this will also affect performance and noise levels.
When installing the fan directly into an exhaust shaft, make sure that the fan pipe does not block the exhaust duct.
Warranty
The warranty for the Vents Style fan is 100 - 60 months (5 years) subject to compliance with the rules of transportation, storage, installation and operation. During this period, the manufacturer guarantees the normal operation of the equipment.
Documentation
You can download the passport, installation and operating instructions by clicking on the image below (pdf file 1.6 MB, will open in a new tab)
