Subcategories
90° horizontal bendsA 90° horizontal ben..
90° vertical bendsA 90° vertical bend ch..
Bends for flat and round ductsA bend for..
Connectors for tees and bendsChoose conn..
Connectors with dampersFor flat duct con..
Duct bracketsA bracket must hold the duc..
Flat duct connectorsA flat duct connecto..
Flat duct teesA flat duct tee must fit w..
Flat duct transitionsChoose a flat duct ..
Flat ductsFlat ducts suit routes with li..
Tees for flat and round ductsA tee for f..
Transitions for flat and round ductsComp..
Ventilation grillesThese lattices are in..
Wall plateA wall plate for flat ducting ..
Rectangular plastic air ducts
For rectangular ducts, distinguish connection width from height to avoid unintended rotation.
The useful section and the continuity of the unions affect the distribution of air. The layout should consider losses, fixations and access to maintenance.
Brand: Vents
Availability: In stock
Plastic flat air duct 9005 with a cross-section of 90x220 mm and a length of 0.5 meters is used in ventilation systems to move air. Included in the Pl..
11.05 €
Ex Tax:9.13 €
Brand: Vents
Availability: In stock
A plastic rectangular duct 90x220 mm and 1 meter long is used to move air in exhaust or supply ventilation systems. Application For supply or exhaust..
22.40 €
Ex Tax:18.51 €
Brand: Vents
Availability: In stock
A flat 90x220 plastic channel 1.5 meters long is used for ventilation. The plastic air duct is one of the elements of the Plastivent ventilation syste..
35.22 €
Ex Tax:29.11 €
Brand: Vents
Availability: In stock
A plastic flat duct 9020 with a cross-section of 90x220 mm and a length of 2 meters is used to move air in ventilation systems. It is one of the eleme..
40.11 €
Ex Tax:33.15 €
Brand: Vents
Availability: In stock
Plastic flat air duct 5005 is used to move air in the ventilation system. It is one of the elements of the Plastivent plastic channel system. Applica..
6.24 €
Ex Tax:5.16 €
Brand: Vents
Availability: In stock
Flat channel 5010, 1 meter long, is intended for use as part of the Plastivent ventilation system. Using this system, you can create exhaust or supply..
11.26 €
Ex Tax:9.31 €
Brand: Vents
Availability: In stock
A plastic rectangular duct 5015 with a cross-section of 55x110 mm and a length of 1.5 meters is designed to create a ventilation system. It is one of ..
16.74 €
Ex Tax:13.84 €
Brand: Vents
Availability: In stock
Flat channel 5020, 2 meters long, is used to move air in an exhaust or supply ventilation system. The air duct is one of the components of the Plastiv..
22.31 €
Ex Tax:18.44 €
Brand: Vents
Availability: In stock
A plastic rectangular duct 7005 with a cross-section of 60x120 mm is used to move air in exhaust or supply ventilation systems. It is one of the venti..
6.62 €
Ex Tax:5.47 €
Brand: Vents
Availability: In stock
Plastic flat air duct 7015, 1.5 meters long and with a cross-section of 60x120 mm, is used in exhaust or supply ventilation systems. One of the elemen..
17.50 €
Ex Tax:14.47 €
Brand: Vents
Availability: In stock
Plastic rectangular duct 7020, 2 meters long and with a cross-section of 60x120 mm, is used in exhaust or supply ventilation systems. One of the eleme..
23.24 €
Ex Tax:19.21 €
Brand: Vents
Availability: In stock
Plastic flat air duct 8005 with a cross-section of 60x204 mm and a length of 50 cm is designed to create a ventilation system. It is one of the elemen..
8.44 €
Ex Tax:6.97 €What to check to choose
- Useful section
- Stage orientation
- Connections and supports
How to prepare the consultation
- Identify the equipment, connection or installation point where it will be used.
- Contrast measurements, working conditions and reference with system documentation.
- Check accessories, assembly and maintenance before confirming the selection.
Frequently asked questions
Does a conduit of the same nominal measure always fit?
No. fit and tolerances depend on the system; it confirms the actual measurements and the compatible accessories.
What information does the consultation of this category make?
Provide the following information: Useful section; Stage orientation; Connections and supports. Add the product reference and photographs of the site or existing component, where applicable.