Order Outdoor unit General Airstage V-III AJG414LALBH, microclimate in large buildings in Valencia at a great price

Outdoor unit General Airstage V-III AJG414LALBH, microclimate in large buildings

The V-III series VRF system by FUJITSU is a large multi-zone system that effectively conditions air in both multi-story buildings and private homes. Laconic and modern design, a wide range of models with a capacity from 8 to 54 hp in 2 hp increments, the ability to connect up to 64 indoor units. The total capacity of the connected indoor units of the V-III series VRF system by FUJITSU is up to 150%.

The highest COP level for any combination of units is achieved by a set of unique technologies, such as a special heat exchanger design, a high-performance DC inverter compressor, and a powerful large-diameter fan. With the longest pipe line length in its class at 1000 m, as well as the length of the route from the first branch to the most remote indoor unit - up to 90 m, the VRF system TM FUJITSU is easy to design and select for any building layout.

High static pressure of 82 Pa makes it possible to connect an additional air duct to the outdoor unit. This allows installing outdoor units in technical rooms of high-rise buildings. A comfortable indoor climate is maintained even during oil return, since the system continues to operate.

• Excellent energy savings Inverter heat pump: high energy savings in both cooling and heating thanks to All DC inverter technology to maximize seasonal efficiency.
• Easy installation and maintenanceEasy connection and flexible communication between units make our units and their maintenance easy to operate even in large ground-based systems.
• High static pressure of 82 PaThe outdoor unit can have an air exhaust duct with a static pressure of up to 82 Pa. This allows the outdoor unit to be installed inside the machine room and have the ability to carry out exhaust.
• Advanced operation controlWhen the units are connected to each other, the various compressors operate in a complex manner. Efficiency is significantly increased by the operation of the rotary compressor at low speed, distributing the force.
• Ideal heat exchanger controlThe heat exchanger is divided into 2 parts: upper and lower. The efficiency of heat exchange is increased by optimal management of the refrigerant, which is distributed to the upper part of the heat exchanger, where the flow of incoming air is greater.

Maximum efficiency of each operation

All our combinations have maximum technology and efficient consumption thanks to our
energy coefficients.Some of the benefits are possible thanks to our exclusive air access design to the heat exchanger, our highly efficient DC Twin Rotary compressor and our innovative design, which increases the effective exchange surface up to 1.7 times.