Microclimate in large buildings General Airstage V-III AJG468LALBH, multi-zone system
VRF system of the V-III series from TM FUJITSU is a highly efficient multi-zone system designed for air conditioning in multi-storey buildings and private houses. It has a laconic, modern design and a wide range of models with a capacity from 8 to 54 hp in 2 hp increments. The system supports the connection of up to 64 indoor units, providing a total capacity of up to 150%.
High coefficient of performance (COP) is achieved thanks to unique technologies: a special heat exchanger design, a powerful DC inverter compressor and a large-diameter fan. The system has the longest pipe line in its class - up to 1000 m, as well as a route length from the first branch to the most distant indoor unit - up to 90 m, which makes it ideal for any building layout.
The system provides high static pressure of 82 Pa, which allows you to connect an additional air duct to the outdoor unit and install it in technical rooms of high-rise buildings. Even during the oil return, the system continues to operate, maintaining a comfortable microclimate in the room.
Microclimate in large buildings General Airstage V-III AJG468LALBH, multi-zone system
- Excellent energy savings Inverter heat pump: high energy savings in both cooling and heating thanks to All DC inverter technology to maximize seasonal efficiency.
- Easy installation and maintenanceEasy connection and flexible communication between units make our units and their maintenance easy to operate even in large ground-based systems.
- High static pressure of 82 PaThe outdoor unit can have an air exhaust duct with a static pressure of up to 82 Pa. This allows the outdoor unit to be installed inside the machine room and have the ability to carry out exhaust.
- Advanced operation controlWhen the units are connected to each other, the various compressors operate in a complex manner. Efficiency is significantly increased by the operation of the rotary compressor at low speed, distributing the force.
- Ideal heat exchanger controlThe heat exchanger is divided into 2 parts: upper and lower. The efficiency of heat exchange is increased by optimal management of the refrigerant, which is distributed to the upper part of the heat exchanger, where the flow of incoming air is greater.
Maximum efficiency of each operation
All our combinations have maximum technology and efficient consumption thanks to our
energy coefficients.Some of the benefits are possible thanks to our exclusive air access design to the heat exchanger, our highly efficient DC Twin Rotary compressor and our innovative design, which increases the effective exchange surface up to 1.7 times.
