Vents 125 LDVT is a fanequipped with a cord switch and a timer.
After disconnecting from the mains, the fan continues to operate for the time set by the timer from 2 to 30 minutes.
Specifications
| Parameter | Value |
| Voltage, V | 220 |
| Current frequency, Hz | 50 |
| Maximum power, W | 16 |
| Capacity, m3/h | 167 |
| < strong>Current, A | 0.1 |
| Rotation speed, min-1 | 2400 |
| Noise level at a distance of 3 m, dB(A) | 34 |
| Weight, kg | 0.74 |
| Protection, class | IP34 |
| Pipe size, mm < /br> | 125 |
Overall dimensions
| Dimensions | ?D | B | H | L | L1 |
| mm | 125 | 177 | 140 | 135 | 34 |
Connection diagram
< p>
Application
- Continuous or periodic exhaust ventilation of bathrooms, showers, kitchens and other domestic premises.
- For installation in ventilation shafts or connection to air ducts.
- Moving small and medium-sized air flow over short distances with low resistance of the ventilation system.
- Modern design and aesthetic appearance.
- The body, impeller and front panel of the Vents 125 LDVT fan are made of high-quality and durable ABS plastic, resistant to ultraviolet radiation.
- Various decorative overlays are available for the front panel made of natural aluminum.
- The design of the impeller increases the efficiency of the fan and the service life of the motor.
- Protection degree IP 34.
- Reliable motor with low energy consumption.
- Designed for continuous operation and does not require maintenance.
- Equipped with overheating protection
- The fan is installed directly into the opening of the ventilation shaft.
- When the ventilation shaft is located remotely, it is possible to use flexible air ducts. The air duct is connected to the fan outlet flange using a clamp.
- Attached to the wall with screws.
- Can be used for ceiling mounting.
