This Vents 100 LDVT fanis equipped with a pull cord switch and a timer.
After disconnecting from the mains, the fan continues to operate for the time set by the timer from 2 to 30 minutes.
Specifications
| Parameter | Value |
| Voltage, V | 220 |
| Current frequency, Hz | 50 |
| Maximum power, W | < td style='text-align: center,'>14 |
| Capacity, m3/h | 88 |
| Current, A | 0.85 |
| Rotation speed, min-1 | 2300 |
| Noise level at a distance of 3 m, dB(A) | 33 |
| Weight, kg | 0.6 |
| Protection, class < /td> | IP34 |
| Pipe size, mm | 100 |
Dimensions
| Dimensions | ?D | B | H | L | L1 |
| mm | 100 | 152 | 120 | 126 | 30 |
Connection diagram
< p>
Application
- Continuous or periodic exhaust ventilation of bathrooms, showers, kitchens and other domestic premises .
- For installation in ventilation shafts or connection to air ducts.
- Moving small and medium-sized air flow over short distances with low resistance of the ventilation system.
- Modern design and aesthetic appearance.
- The body, impeller and front panel of the Vents 100 LDVT fan are made of high-quality and durable ABS plastic, UV-resistant.< /li>
- Various decorative overlays are available for the front panel made of natural aluminum.
- The design of the impeller increases the efficiency of the fan and the service life of the motor.
- Protection degree IP 34.
Motor
- Reliable motor with low energy consumption.
- Designed for continuous operation and does not require maintenance.
- Equipped with protection from overheating
Installation features
- The fan is installed directly into the opening of the ventilation shaft.
- When the ventilation shaft is located remotely, it is possible to use flexible air ducts. The air duct is connected to the fan outlet flange using a clamp.
- Attached to the wall with screws.
- Can be used for ceiling mounting.
