Subcategories
Aluminum tapeChoose aluminium tape by th..
Duct clampsChoose clamps by the duct and..
Ducts and installation componentsInstall..
Ducts and installation components
Plan a duct network using cross-sections, changes of direction and compatible connections.
The useful section and the continuity of the unions affect the distribution of air. The layout should consider losses, fixations and access to maintenance.
Brand: Vents
Availability: In stock
Plastic rectangular duct 7020, 2 meters long and with a cross-section of 60x120 mm, is used in exhaust or supply ventilation systems. One of the eleme..
from
23.24 €
Ex Tax:19.21 €
Brand: Vents
Availability: In stock
Plastic flat air duct 8005 with a cross-section of 60x204 mm and a length of 50 cm is designed to create a ventilation system. It is one of the elemen..
from
8.44 €
Ex Tax:6.97 €
Brand: Vents
Availability: In stock
A plastic rectangular duct 8010 with a cross-section of 60x204 mm and a length of 1 meter is used to move air in exhaust or supply ventilation systems..
from
16.03 €
Ex Tax:13.25 €
Brand: Vents
Availability: In stock
A flat plastic channel 8015, 1.5 meters long and with a cross-section of 60x204 mm, is used for exhaust or supply ventilation. The air duct is one of ..
from
24.72 €
Ex Tax:20.43 €
Brand: Vents
Availability: In stock
Plastic flat air duct 8020 with a cross-section of 60x204 mm and a length of 2 meters is used to move air in ventilation systems. It is one of the ele..
from
31.84 €
Ex Tax:26.32 €
Brand: Vents
Availability: In stock
Wall-mounted corner plenum Vents Flexivent 0833200x55/75x2 is designed for connecting two round air ducts with a diameter of 75 mm and a wall-mounted ..
from
45.51 €
Ex Tax:37.61 €
Brand: Vents
Availability: In stock
Air duct adapter for connecting channels with a cross-section of 100 mm and 125 mm to each other. Reducer 211 is one of the elements of the Plastivent..
from
3.42 €
Ex Tax:2.82 €
Brand: Vents
Availability: In stock
Ventilation reducer 216 is designed for connecting two plastic air ducts with a diameter of 120 mm and a diameter of 125 mm. This connector is one of ..
from
3.42 €
Ex Tax:2.82 €
Brand: Vents
Availability: In stock
Round elbow FlexiVent 060375 is designed for connecting two round air ducts with a diameter of 75 mm at an angle of 90°. This product is one of the el..
from
12.95 €
Ex Tax:10.70 €
Brand: Vents
Availability: In stock
Round flange FlexiVent 0263 is used to connect round ducts with a diameter of 63 mm and a manifold, which distributes air from the ventilation unit. ..
from
1.73 €
Ex Tax:1.43 €
Brand: Vents
Availability: In stock
Round flange FlexiVent 0275 is used to connect round ducts with a diameter of 75 mm and a manifold, which distributes air from the ventilation unit. ..
from
2.07 €
Ex Tax:1.71 €
Brand: Vents
Availability: In stock
Round lock FlexiVent 0375 is used for fixing a round channel with a diameter of 75 mm on a Flexivent flange of the corresponding diameter. Material: p..
from
0.72 €
Ex Tax:0.59 €What to check to choose
- Design section and flow
- System material
- Access to bonds and supports
How to prepare the consultation
- Identify the equipment, connection or installation point where it will be used.
- Contrast measurements, working conditions and reference with system documentation.
- Check accessories, assembly and maintenance before confirming the selection.
Frequently asked questions
Does a conduit of the same nominal measure always fit?
No. fit and tolerances depend on the system; it confirms the actual measurements and the compatible accessories.
What information does the consultation of this category make?
Provide the following information: Design section and flow; System material; Access to bonds and supports. Add the product reference and photographs of the site or existing component, where applicable.