Specifications
| Option | Size |
| Voltage, V | 230 |
| Current frequency, Hz | 50 |
| Power consumption, W | 20 |
| Maximum air flow, m3/h | 240 |
| Current, A< /strong> | 0.14 |
| Noise level at a distance 3 m, dB(A) | 33 |
| Weight, kg< /strong> | 0.85 |
| Protection | IP 34 |
| Pipe size, mm | 150 |
Dimensions
| ?D | B | H < /td> | L | L1 |
| 150 | 205 | 165 | 132 | 14 |
Scheme for connecting the fan to the network< br>
Diagram for connecting a fan without a built-in switch to the network
Application
- Designed for periodic or continuous exhaust ventilation of toilets, bathrooms, showers, kitchens and other rooms
- Low noise level - 33 dB(A)
- Mounted in a ventilation shaft or in a ceiling or wall with an air duct with a diameter of 150 mm (not included in delivery) included, ordered separately if necessary)
Design
- The fan impeller and its housing are made of high-quality durable plastic. The plastic is inert to sunlight
- Due to the improved design of the fan impeller, the engine life is increased and the noise characteristics are reduced*
- The fan is equipped with a mesh to prevent insects from getting inside
- Degree motor protection IP 34.
*Silent fans only size 100 mm (Silent 100 s modifications), fans of this standard size - Silenta 150 have greater performance and a higher noise level - 31 dB(A).
Motor
- Reliable motor with a minimum power consumption of 20 W
- The motor does not require maintenance, its constant operation is allowed
- Built-in protection from overheating.
Control
Manual:
- The fan is controlled using the room light switch. The switch is not included in the delivery.
- Speed adjustment can also be done manually using a thyristor regulator (see Electrical accessories). Fans can be connected several times to one control device.
Automatic:
- using a fan control unit (ordered separately). The control unit allows you to set the mode of turning the fan on and off: by timer, by motion sensor, by humidity sensor
Installation features
- The fan is installed directly into the ventilation duct of the ventilation shaft premises. If necessary, it is possible to use an additional air duct (flexible or plastic).
- The fan is attached to the wall or ceiling using screws
- Installing the fan is a simple procedure accessible to everyone
