Brand: Vents
Model: 9430
Vents DVP 795 swirl diffuser is installed in a suspended ceiling. Used for air distribution in ventilation and air conditioning systems. With the help of inserts you can regulate the air flow. Overall dimensions of the grille are 795x795 mm. The color of the grille is white. What it consists of The ..
117.17 €
Ex Tax:117.17 €
Brand: Vents
Model: 10034
ApplicationClamps are designed for quick and reliable installation and connection of various elements of a circular ventilation system. Clamps facilitate installation and removal of fans for maintenance and cleaning. DesignHBR 3000 series clamps - tape clamps in a plastic case (roll 30 m x 9 mm x 0...
94.46 €
Ex Tax:94.46 €
Brand: Vents
Model: 10359
Ventilation round tee 150/125 is designed for connecting an air duct with a diameter of 150 mm to an air duct at a right angle with a diameter of 125 mm. A galvanized steel tee is a shaped part designed for branching a line of air ducts (i.e., for branching one air flow into two or combining two flo..
9.40 €
Ex Tax:9.40 €
Brand: Vents
Model: 10315
Tee 200/125 round ventilation is used to connect an air duct with a diameter of 200 mm to an air duct at a right angle with a diameter of 125 mm. A galvanized steel tee is a shaped part designed for branching a line of air ducts (i.e., for branching one air flow into two or combining two flows into ..
13.17 €
Ex Tax:13.17 €
Brand: Vents
Model: 10261
Air ducts and fittings are made of galvanized steel with a thickness of: p=0.55 ( - 100-355 mm); p=0.7 ( - 400-800 mm); p=1.0 ( - 900-1600 mm). To ensure rigidity of air ducts with diameters greater than 315 mm, additional stiffening ribs (intermediate zig) are provided. Used to connect an air duct ..
16.09 €
Ex Tax:16.09 €
Brand: Vents
Model: 10262
Tee 250/150 round ventilation is used to connect an air duct with a diameter of 250 mm to an air duct at a right angle with a diameter of 150 mm.Advantages of galvanized air ducts: strength and high reliability of the system; uniform distribution of air flow inside the pipe; low noise and vibration..
18.06 €
Ex Tax:18.06 €
Brand: Vents
Model: 10210
For connection to an air duct with a diameter of 315 mm of an air duct at a right angle with a diameter of 125 mm. The 315/125 tee for ventilation made of galvanized steel is a shaped part designed for branching a line of air ducts (i.e. for branching one air stream into two or combining two streams..
20.06 €
Ex Tax:20.06 €
Brand: Vents
Model: 10208
Ventilation round tee 315/150 is designed for connecting an air duct with a diameter of 315 mm to an air duct at a right angle with a diameter of 150 mm. A galvanized steel tee is a shaped part designed for branching a line of air ducts (i.e., for branching one air flow into two or combining two flo..
21.89 €
Ex Tax:21.89 €
Brand: Vents
Model: 10207
For connection to an air duct with a diameter of 315 mm of an air duct at a right angle with a diameter of 200 mm. The tee 315/200 for ventilation made of galvanized steel is a fitting designed for for branching a line of air ducts (i.e. for branching one air stream into two or combining two streams..
25.40 €
Ex Tax:25.40 €
Brand: Vents
Model: 10055
Tee 531 is designed to connect a rectangular channel 55x110 and a round one with a diameter of 100 mm. It is one of the connecting elements of the Plastivent plastic channel system for ventilation.Application For the formation of branch units for supply or exhaust ventilation systems of domestic, p..
7.29 €
Ex Tax:7.29 €
Brand: Vents
Model: 10056
Tee for flat ducts 535 is used to connect three plastic air ducts with a cross-section of 55x110 mm to each other. Application For the formation of branch units for supply or exhaust ventilation systems of domestic, public and other buildings. For connecting flat channels of the same cross-section..
5.17 €
Ex Tax:5.17 €