DOMIS catalogue
Browse the DOMIS catalogue and compare materials, formats and options for your project.
Ask a question about this product
- Brand: Domis
- Model: 952811651
Compatibility
Trust the AVOSDIM ø35 mm radio motor with a torque of 10 Nm , specially adapted for the automation of canopies and roller shutters of medium gravity . Control them with one of our AvosDim remote controls (remote controls are sold separately).
Setup Help
Choose the right power
The engine power must be selected according to the weight of the blinds - the weight is calculated after reading the dimensions of the height and width of the visible apron of the slats.
Apron weight estimation
width* x height* x (weight per m2 **)
* the measurement must be specified in meters
** estimated weight of the bar: PVC (4 kg/m2), aluminum (4.5 kg/m2), wood (11 kg/m2)
For example, a set of aluminum slats has dimensions of 1.2 x 1.5 m :
1.2 x 1.5 x 4.5 = 8.1 kg.You must choose an engine that matches the power capable of lifting at least 8.1 kg.Here is 10 Nm.
It is believed that 1 Nm supports 2 kg. Refer to the most suitable capacity.
Our advice: If the adaptation of a motor more powerful than necessary is not harmful, then on the contrary it can lead to irreversible failure, which is not guaranteed - Be sure to follow the recommendations to save the life of your motor.
Select adaptations
Your chosen set of devices will consist of a wheel and a crown . One allows the motor to control the axis during rotation, and the other counts the number of revolutions to mark a stop at the right place (stops).
The choice of devices should be made depending on the brand of the engine, its diameter and the shaft model. If it's a similar engine replacement, you don't need to purchase them. Otherwise, they are necessary.
The devices we have are compatible with octahedral axes with a diameter of 40 mm .
Choose suitable engine supports
Engine supports are also important . Attached to one of the side walls of the shutter casing (on the engine side), they serve to securely fix the motor/shaft/casing assembly.
Our choice takes into account compatibility with the selected engine head.
Technical characteristics of DOMIS wire motors
| Power | Engine pipe length * | Rotation speed |
| 6 Nm | 568mm | 14 rpm |
| 10 Nm | 568mm | 17 rpm |
| 13 Nm | 568mm | 14 rpm |
* This is the total size of the motor on the axle (the drive wheel is provided for this measurement). Regardless of the choice of power, the off-axis motor head has dimensions of 16 mm.
- Other features
Consumption: 230 V / 50 Hz
Cage capacity: 22 cartridges
Power: 6 Nm 98 W; 10 Nm 121 W; 13 Nm 121 W
Manual limit switches
Motor diameter: 35mm
Protection index: IP44
Product certificates: CE, TUV (Germany), VDE (Germany), ROH
