DOMIS catalogue
Browse the DOMIS catalogue and compare materials, formats and options for your project.
Ask a question about this product
- Availability: 99
- Brand: Vents
- Model: 9867
- Weight: 4.30kg
- UPC: 9867
- JAN: 464
The duct centrifugal fan Vents VKMts 250 is intended for use in supply and exhaust ventilation systems for premises for various purposes, where the temperature of the moved air is in the range from -25°C to +55°C. It is possible to install the fan on an external street wall. For rooms with increased requirements for noise levels, low-noise options are offered (VKMts...B). This fan is supplied in an unpainted galvanized casing.
Specifications
| Parameter | Value |
| Voltage, V | 230 |
| Current, A | 0.66 |
| Current frequency, Hz | 50 |
| Maximum power, W | 152 |
| Productivity, m3/h | 1070 |
| < strong>Rotation speed, min-1 | 2765 |
| Noise level at a distance of 3 m, dB(A) | 52 |
| Maximum temperature of transported air, C | -25....+50 |
| Weight, kg | 4.3 |
| Protection, class | IPХ4 |
| Pipe size, mm | 250 |
Dimensions
| ?D | B1 | ?D1< /strong> | B | L | L1 | L2 | L3 |
| 249 | 380 | 332 | 340 | 213 | 25 | 29 | 40 |
Diagrams
Design
The Vents VKMts 250 fan housing is made of galvanized steel. For more convenient connection and use, the fan can be equipped with a power cord with a plug (VKMts…R).
Motor
Single-phase external rotor motors are equipped with a centrifugal impeller with backward-curved blades. The engine is equipped with built-in thermal protection with automatic restart. The use of rolling bearings
in the engine ensures a long service life (40,000 hours). To achieve precise performance, low noise levels and safe fan operation, each turbine undergoes dynamic balancing during assembly. The motor in the fan has a protection class of IP 44.
Speed adjustment
Smooth or step adjustment is carried out using a thyristor or autotransformer. Several fans can be connected to one control device simultaneously, provided that the total power and operating current do not exceed the rated parameters of the controller.
It is possible to use a speed controller (supplied separately) RS-1-300
Installation
Mounting at any angle relative to the fan axis is allowed. Connection to the wall is carried out using mounting brackets, which are included in the delivery set. Power is supplied to the fan through the external terminal box. Electrical connection and installation must be carried out in accordance with the instructions and electrical diagram indicated on the terminal box.
Example of fan installation
Documentation
Vents VKMts fan data sheet 250
