Order Fan Vents VKMI 315 S in Valencia at a great price

The sound-insulated fan Vents VKMI 315 C is designed to move air through air ducts in supply or exhaust ventilation systems. The temperature of the transported air can be in the range from -25°C to +45°C. The maximum productivity of this model is 1880 m3/h. The polymer-coated housing and fan protection class allow it to be installed outdoors. Mineral wool 50 mm thick is used as sound insulation.

A centrifugal-type duct fan can be installed outdoors, in which case a canopy is provided at the location to prevent precipitation from entering the housing.

In this model high-power engine is used.

Technical characteristics

< /tr> < td>Weight, kg < /table>

Dimensions

Parameter	Value
Voltage, V	220-240
Current, A	1.34
Current frequency, Hz	50
Maximum power, W	296
Productivity, m3/h	< strong>1880
Rotation speed, min-1	2720
Noise level at a distance of 3 m, dB(A)	48
Maximum temperature of transported air, C	-25....+45
15.45
Protection, class	IPХ4
< strong>Pipe size, mm	315

Dimensions	A	B	?D	H	C	h	c
mm	675	460	313	320	449	250	250

Diagram

Design

< p>The outer steel part of the body is covered with a polymer coating, the inner part is perforated and filled with noise-absorbing material. The heat and noise insulation of the housing is made of a 50 mm thick isover layer. The impeller and inner casing are made of engineering plastic.

The mounting bracket is supplied separately.

Engine

A single-phase Blauberg electric motor with an external rotor is used, equipped with an impeller with forward-curved blades. The engine uses rolling bearings with a service life of up to 40,000 hours. The turbine is dynamically balanced to ensure precise aerodynamic performance, quality assurance and low noise levels.

The motor is equipped with built-in thermal protection with automatic restart.

Motor protection class IP 44.

Control

On-off

The fan is turned on using an external switch (not included in the delivery package) according to the connection diagram below.

Speed adjustment

Air flow control is carried out using a thyristor regulator RS-1-400(supplied separately)

Installation

Installation at any angle relative to the fan axis is allowed. Attachment to the wall is carried out using mounting brackets, which are purchased separately. Power is supplied to the fan through the external terminal box. Electrical connection and installation must be carried out in accordance with the instructions and electrical diagram indicated on the terminal box.

Warranty

The manufacturer establishes a warranty period for the product of 24 months (2 years) from the date of sale of the product, subject to the user following the rules of transportation, storage, installation and operation products.

Installation example

Instructions and guide

( pdf file, opens in a new tab)