Vents 100 MA is a household fan with automatically closing blinds. Designed for wall or ceiling installation. The peculiarity of this fan is that when the fan is turned on, the blinds on the front grille open, and when the fan is turned off, the blinds smoothly close. Thus, the ventilation duct is blocked when the fan is not working, which prevents air from entering the ventilation shaft into the room being served.
Technical characteristics
| Parameter | Value |
| Voltage, V < /br> | 220 |
| 18 | |
| Productivity, m3/h | < strong>98 |
| Current, A | 0.085 |
| Rotation speed, min-1 | 2300 |
| Noise level at a distance of 3 m, dB(A)< /strong> | 34 |
| Weight, kg | 0.65 |
| Protection, class | IP24 |
| Pipe size, mm | 100 |
Drawing and dimensions
| Dimensions | ?D | B | B1 | B2 | H | L | L1 |
|---|---|---|---|---|---|---|---|
| mm | 100 | 165 | 150 | 150 | 150 | 92 | 32 |
Connection diagram
Connection diagram for a fan without a built-in switch to the network
Application
- Continuous or periodic exhaust ventilation of bathrooms, showers, kitchens and others domestic premises.
- For installation in ventilation shafts or connection to air ducts.
- Moving small and medium-sized air flow over short distances with low resistance of the ventilation system.
- For installation with 100, 125 and 150 mm air ducts.
Design
- Modern design and aesthetic appearance.
- Casing and impeller made of high-quality and durable ABS plastic, resistant to ultraviolet radiation.
- The design of the impeller increases the efficiency of the fan and the service life of the motor.
- The fan is equipped with a device that ensures smooth opening and closing of automatic shutters, preventing reverse draft.
- Protection degree IP 24.
Motor
- Reliable motor with low energy consumption.
- Designed for continuous operation and does not require maintenance.
- Equipped with overheating protection.
Control
Manual:
- The fan is controlled using the room light switch. The switch is not included in the delivery.
- The fan is controlled via a built-in cord switch “B”. When the fan is mounted on the ceiling, this option is not used.
- Speed control can be carried out using a thyristor regulator (see Electrical accessories). Fans can be connected several at a time to one control device.
Automatic:
- Using an electronic control unit BU-1-60(see Electrical accessories). The control unit is supplied separately.
- Using a timer “T” (the built-in adjustable shutdown delay timer allows the fan to operate for 2 to 30 minutes after it is stopped by the switch). li>
- Using a humidity sensor and a timer “ТН” (if the humidity in the room exceeds the value set on the sensor of 60-90%, the fan will automatically turn on and continue operating until the humidity will return to normal, then the fan works out the time set on the timer and turns off).
- Using a motion sensor and timer “TR” (if the sensor detects movement in its area of action, then the fan will automatically turn on and continue working on a timer from 2 to 30 minutes Detection range up to 4 meters (detection angle max. 100°).
Installation
- The fan is installed directly into the opening of the ventilation shaft.
- When the ventilation shaft is located remotely, it is possible to use flexible air ducts. The air duct is connected to the fan outlet flange using a clamp.
- Attached to the wall with screws.
- Can be used for ceiling mounting.
- Shortened pipe 92 mm long . For convenient installation in walls and ceilings up to 100 mm thick.
Installation example
Customer sheet of the Vents MA series fan
