This Vents 100 XT fanis equipped with a timer.
After disconnecting from the mains, the fan continues to operate for the time set by the timer from 2 to 30 minutes.
< h3>Specifications| Parameter | Value< /td> |
| Voltage, V | 220 |
| Current frequency, Hz | 50 |
| Maximum power, W | 14 |
| Productivity, m3/h < /td> | 89 |
| Current, A | 0.085 |
| < strong>Rotation speed, min-1 | 2300 |
| Noise level at a distance of 3 m, dB(A) | 33 |
| Weight, kg | 0.61 |
| Protection, class | IP34 |
| Pipe size, mm | 100 |
Overall dimensions
< p>
| Dimensions | ?D | B | H | L | L1 |
| mm | 100 | 183 | 120 | 151 | 58 |
The principle of operation of a fan with a timer
It is turned on from an external switch (for example, from a light switch). After turning off the switch, the fan will continue to operate for the time set on the shutdown timer and turn off.
Connection diagram
Application
- Continuous or periodic exhaust ventilation of bathrooms, showers, kitchens and others domestic premises.
- For installation in ventilation shafts or connection to air ducts.
- Moving small and medium-sized air flow over short distances with low resistance.
- Modern design and aesthetic appearance.
- The body and impeller of the Vents 100 XT fan are made of high-quality and durable ABS plastic, resistant to ultraviolet radiation.
- The design of the impeller allows you to increase the efficiency of the fan and the service life of the motor.
- Decorative interchangeable color inserts included - blue, light green, yellow and pink.
- Protection degree IP 34.
Motor
- Reliable motor with low energy consumption.
- Designed for continuous operation and does not require maintenance.
- Equipped protection against overheating.
Control
Manual:
- The fan is controlled using the room light switch. The switch is not included in the delivery.
Installation features
- The fan is installed directly into the opening of the ventilation shaft.
- If the ventilation shaft is located remotely, it is possible use of flexible air ducts. The air duct is connected to the fan outlet flange using a clamp.
- Attached to the wall with screws.
- Can be used for ceiling mounting.
Example installation
