The Domovent 150 VKO fan is used for exhaust or supply ventilation of residential or commercial premises. The nominal capacity is 188 m3/h, connected to flexible or rigid channels with a diameter of 150 mm. Consumption does not exceed 24 W per hour.
Most often such fans are used for exhaust ventilation of bathrooms, bathrooms or kitchens. The fan is located behind a suspended or false ceiling; air is removed from the room through an air duct and ventilation grille. The release is carried out into an exhaust shaft.
Technical characteristics
| Parameter | Value | Unit of measurement |
| Voltage | 220-240 | B |
| Current frequency | 50 | Hz |
| Maximum power | 24 | Tue |
| Performance | 290 | m3/h |
| Current | 0.1 | A |
| Rotation speed | 2400 | min-1 |
| Noise level at a distance of 3 m | 40 | dB(A) |
| Weight | 0.8 | kg |
| Protection | IP X4 | class |
| < strong>Pipe size | 150 | mm |
Dimensions
| Dimensions | ?D | ?D1 | L< /strong> | L1 |
| mm | 150 | 154 | 108 | 46 |
Design
- The housing and impeller are made of ABS engineering plastic. The material is strong, durable, non-toxic and does not corrode.
- The shape of the impeller reduces noise levels and reduces overall consumption
- The electric motor is equipped with overheating protection
- The fan can run continuously or turn on periodically
- Protection degree IP X4.
How to turn on
The fan is controlled via a room light switch. The switch is not included in the delivery.
If you need to continuously adjust the performance, you can use a thyristor regulator RS-1-300(purchased separately)
Using it, you can turn on the fan, select the required performance and turn it off. As performance decreases, the fan noise level decreases.
It is possible to connect several fans to one controller. In this case, the performance of the connected fans will be adjusted simultaneously.
Installation features
The fan is connected to air ducts with a diameter of 125 mm. The diameters of the inlet and outlet pipes are different; this is done to make it possible to attach a decorative grille of theMVseries with a flange of the corresponding diameter on the air intake side (when installing the fan directly into the hole in the ventilation shaft or in place of an existing ventilation grille). p>
It is possible to install 2 fans in series to increase the pressure.
Warranty
The manufacturer guarantees normal operation of the fan for24 months (2 years)from the date of sale, subject to compliance with the rules of transportation, storage, installation and operation.
Passport
(pdf file, opens in a new tab)
