Compatibility
Our AvosDim electric drives are ideal for roller shutters and blinds that you want to control with a switch (not included). Regardless of the brand, the only requirement is compatibility with the roller shutter drive (up, down, stop buttons).
Do you want autonomy? Replace this switch with a TEL_AC400 programming clock so that your motorized products can work regardless of your presence (not included — see related products).
Setup Help
Choose the right power
The engine power must be selected in accordance with the weight of the blinds - the weight is calculated after reading the dimensions of the height and width of the visible apron of the slats.
Apron weight estimation
width* x height* x (weight per m2 **)
* the measurement must be specified in meters
** estimated weight of the bar: PVC (4 kg/m2), aluminum (4.5 kg/m2), wood (11 kg/m2)
For example, a set of aluminum slats has dimensions of 1.2 x 1.5 m :
1.2 x 1.5 x 4.5 = 8.1 kg.You should choose an engine corresponding to the power capable of lifting at least 8.1 kg. 10 Nm here.
It is believed that 1 Nm supports 2 kg. Refer to the most suitable capacity.
Select adaptations
Your chosen set of devices will consist of a wheel and a crown . One allows the motor to control the axis during rotation, and the other counts the number of revolutions to mark a stop at the right place (stops).
The choice of devices should be made depending on the brand of the engine, its diameter and the shaft model. If it's a similar engine replacement, you don't need to purchase them. Otherwise they are necessary.
The devices we have are compatible with octahedral axes with a diameter of 40 mm .
Choose suitable engine supports
Engine supports are also important . Attached to one of the side walls of the shutter casing (on the engine side), they serve to securely fix the motor/shaft/casing assembly.
Our choice takes into account compatibility with the selected engine head.
Technical characteristics of AvosDim wire motors
| Power | Engine pipe length * | Rotation speed |
| 10 Nm short | 368mm | 17 rpm |
| 13 Nm | 475mm | 14 rpm |
* This is the total size of the motor on the axle (the drive wheel is provided for this measurement). Regardless of the choice of power, the off-axis motor head has dimensions of 19 mm.
- Other features
Consumption: 230 V / 50 Hz
Cage capacity: 22 cartridges
Manual limit switches
Motor diameter: 35mm
Protection index: IP44
Product certificates: CE, TUV (Germany), VDE (Germany), ROH
Package contents
- The engine is at the required power
- 2m black 4-wire VVF cable
- Notification
