Vents 100 MAT is a fan for exhaust in a bathroom or bathroomequipped with a timer.
After disconnecting from the mains, the fan continues to operate for the time set by the timer from 2 to 30 minutes.
Specifications
| Parameter | Value |
| Voltage, V | 220 |
| Maximum power consumption, W | 18 |
| Productivity, m3/h | 98 |
| Current, A | 0.085 |
| Rotation speed, min-1 | 2300 |
| Noise level at a distance of 3 m, dB(A) | 34 |
| Weight, kg | 0.65 |
| Protection, class | IP24 |
| Pipe size, mm | 100 |
Drawing and dimensions
| Dimensions | ?D | B | B1 | B2 | H | L | L1 |
|---|---|---|---|---|---|---|---|
| mm | 100 | 165 | 150 | 150 | 150 | 92 | 32 |
How a fan with a timer works
A fan with a timer is activated by an external switch, this can be a light switch.
Connection diagram
Application
- Continuous or periodic exhaust ventilation of bathrooms, showers, kitchens and other domestic premises .
- For installation in ventilation shafts or connection to air ducts.
- Moving small and medium-sized air flow over short distances with low resistance of the ventilation system.
- For installation with air ducts of 100, 125 and 150 mm.
Design
- Modern design and aesthetic appearance.
- The housing and impeller are made of high-quality and durable ABS plastic, resistant to ultraviolet radiation.
- The design of the impeller increases the efficiency of the fan and the service life of the motor.
- The fan is equipped with a device that ensures smooth opening and closing of automatic shutters that prevent reverse traction.
- Protection degree IP 24.
Motor
- Reliable motor with low energy consumption.
- Designed for continuous operation and does not require maintenance.
- Equipped with overheating protection.
Control
Manual:
- The fan is controlled using the room light switch. The switch is not included in the delivery.
Installation features
- The fan is installed directly into the opening of the ventilation shaft.
- If the ventilation shaft is located remotely, it is possible use of flexible air ducts. The air duct is connected to the fan outlet flange using a clamp.
- Attached to the wall with screws.
- Can be used for ceiling mounting.
- Shortened pipe 92 mm long . For convenient installation in walls and ceilings up to 100 mm thick.
