Motorization of manual roller blinds
Control your manual blinds through the switch. There is no need to change everything using the AVOSDIM wired package. Everything you need is there!
After assembling the shaft, simply open the drawer to replace the old pipe with a new one, and then close. It's so simple!
Know the compatibility with your blinds
To find out if your roller blinds are compatible with a wired 10 Nm motorized axis kit, make sure that:
- The previous axis has a diameter of 40 mm and a length from 620 to 1500 mm
- A suitable power has been selected (see the calculation formula below)
* Approximate weight of the lamella: PVC 4 kg / m2, aluminum 4.5 kg / m2, wood 11 kg / m2.
If your roller blind weighs up to 26 kg, 13 Nm is suitable.
Contents of the wired set of motorized axis ø40mm
- 1 - Octahedral axis ø40 mm - Length 1500 mm, recapillable (x1)
- 2 - Pipe tip ø40 mm with swing bearing (x1)
- 3 - turntable plate with teton ø12 mm 75 x 75 mm (x1)
- 4 - Motor mount
- 5 - T-shaped tape fastenings (x3)
- 6 - Wire motor ø35 mm -
Pipe length 475 mm - 13 Nm (x1) - 7 - PergolasVIP switch for installation outside or inside (x1)
