- Adapts to the gate: 4 capacities for lifting up to 100 kg.
- The diameter of the standard format is 45 mm - compatible with many adaptations to the axis of rotation
- One-way protocol: The motor receives commands and executes them from a remote control or a box application (sold separately)
- Long service life - additional guarantee
Setup Help
Choose the right power
The engine power must be selected according to the weight of the blinds - the weight is calculated after reading the dimensions of the height and width of the visible apron of the slats.
Apron weight estimation
width* x height* x (weight per m2 **)
* the measurement must be specified in meters
** estimated weight of the bar: PVC (4 kg/m2), aluminum (4.5 kg/m2), wood (11 kg/m2)
For example, a set of aluminum slats has dimensions of 1.2 x 1.5 m :
1.2 x 1.5 x 4.5 = 8.1 kg.You must choose an engine that matches the power capable of lifting at least 8.1 kg.Here is 10 Nm.
It is believed that 1 Nm supports 2 kg. Refer to the most suitable capacity.
Our advice: If the adaptation of a motor more powerful than necessary is not harmful, then on the contrary it can lead to irreversible failure, which is not guaranteed - Be sure to follow the recommendations to save the life of your motor.
Choose suitable fixtures
Your chosen set of devices will consist of a wheel and a crown . One allows the motor to control the axis during rotation, and the other counts the number of revolutions to mark a stop at the right place (stops).
The choice of devices should be made depending on the brand of the engine, its diameter and the shaft model. If it's a similar engine replacement, you don't need to purchase them. Otherwise, they are necessary.
The devices we offer, among other things, are compatible with octagonal axes with a diameter of 60 mm, as well as with ZF brand axes of 54 and 64 mm, which can be recognized, in particular, by their star-shaped shape.
Choose suitable engine supports
Engine supports are also important . Attached to one of the side walls of the shutter casing (on the engine side), they serve to securely fix the motor/shaft/casing assembly.
Our choice takes into account compatibility with the selected engine head. It remains only to determine the type of roller shutter box and its dimensions in order to get a suitable part.
Compatibility
Our motors are ideal for roller shutters and blinds that you want to control with the PergolaVip remote control (remote controls are sold separately).
Technical characteristics of PergolaVip radio motors
| Power | Engine pipe length * | Rotation speed |
| 10 Nm | 595mm | 15 rpm |
| 20 Nm | 595mm | 15 rpm |
| 30 Nm | 625mm | 15 rpm |
| 50 Nm | 625mm | 12 rpm |
* This is the total size of the motor on the axle (the drive wheel is provided for this measurement). Regardless of the choice of power, the off-axis motor head has dimensions of 19 mm.
General characteristics
Consumption: 230 V / 50 Hz
Cage capacity: 22 cartridges
Manual limit switches
Motor diameter: 45mm
Protection index: IP44
Product certificates: CE, TUV (Germany), VDE (Germany), ROH
Package contents
- The engine is at the required power
- 2m 3-wire VVF Cable - Black
- Adjustment stylus
- Notification
