Buy Set of axles with electric drive for Somfy® RTS damper with electric drive ø60 mm at Factory Prices

Modernization of manual roller shutters

Is your goal to motorize your manually operated roller shutters? Our RTS motorized axle kit is a cost—effective solution to motorize your blinds without having to replace them completely. Installation is fast, there is no need to change the entire shutter. Just open its trunk and remove the previous axle before replacing it.

The Somfy® radio-mechanized valves are controlled using the supplied remote control or any other Somfy® brand remote control. By purchasing this gate electric drive unit, you also get access to connected technologies, since the RTS Somfy drive can be controlled using the Tahoma unit and the Connexoon unit (sold separately).

To find out if your roller shutters are compatible with the Avosdim motorized axle in Somfy radio RTS, make sure that:

• The previous axis has a diameter of 60 mm and a length from 750 to 3500 mm.
• The stored power is sufficient (see the calculation formula below)

* Estimated weight of the bar: PVC 4 kg/m2, aluminum 4.5 kg/m2, wood 11 kg/m2.

Is the capacity of the package selected by width insufficient? Choose a longer length, you will not use an additional telescopic axis.

The composition of packages of radio motor axles ø60 mm

Package of shafts ø60mm - 1500mm

• 1 - Octagonal axis ø60 mm - 1500 mm length can be cut (x1)
• 2 - Tube end ø60 mm (x1)
• 3 - Rotary plate with pin ø12 mm 75 x 75 mm (x1)
• 4 - Universal carrier support
• 5 - T-shaped apron clips (3)
• 6 — Engine ALTUS 50 RTS ø50 mm — length 655 mm — 10 Nm (x1)
• 7 - Adaptation wheel and crown for octagonal axis 60 mm (x1)
• 8 - Self-tapping screws (x3)
• 9 - Somfy SITUO RTS Remote Control (x1)

Package of shafts ø60mm - 2500mm

• 1 - Octagonal axis ø60 mm - 1500 mm length can be cut (x1)
• 2 - 1500mm telescopic octagonal tube with cutting capability (x1)
  (depth 500 mm)
• 3 - Tube end ø60 mm (x1)
• 4 - Rotary plate with pin ø12 mm 75 x 75 mm (x1)
• 5 - Universal carrier support
• 6 - T-shaped apron clips (x5)
• 7 — Engine ALTUS 50 RTS ø50 mm — length 655 mm — 10 Nm (x1)
• 8 - Adaptation wheel and crown for octagonal axis 60 mm (x1)
• 9 - Self-tapping screws (x3)
• 10 - Somfy SITUO RTS Remote control (x1)

Package of shafts ø60mm - 3500mm

• 1 - Octagonal axis ø60 mm, length 1500 mm, can be cut (x1)
• 2 - 1500 mm telescopic octagonal tube that can be cut (x2)
  (corresponding recesses of 500 mm)
• 3 - Tube end ø60 mm (x1)
• 4 - Rotary plate with pin ø12 mm 75 x 75 mm (x1)
• 5 - Universal carrier support
• 6 - T-shaped apron clips (x7)
• 7 — Engine ALTUS 50 RTS ø50 mm — length 655 mm — 20 Nm (x1)
• 8 - Adaptation wheel and crown for octagonal axis 60 mm (x1)
• 9 - Self-tapping screws (x3)
• 10 - Somfy SITUO RTS Remote control (x1)

Performance and technical data of the RTS engine

Trust SOMFY

One of the world leaders in motorization . The choice of this famous French brand, in fact, is a guarantee of access to a wide selection of remote controls, programmable watches and various accessories against the background of innovative technologies.