This Vents 150 Quiet T fan is equipped with a check valve and a delay timer on andoff timerfan. A very convenient function for using a fan in a bathroom or toilet. After turning on the lighting in the room, the fan turns on synchronously or turns on with a delay according to the time set on the time..
Vents 150 Silenta M fan is an exhaust fan used for ventilation of domestic and commercial small premises. It is built into the ventilation shaft; if there is no possibility of direct connection to the shaft, it is possible to use a short-length air duct with a diameter of 150 mm. Application Continu..
This fan is equipped with a timer and humidity sensor. If the humidity in the room exceeds the value set on the sensor of 60-90%, the fan will automatically turn on and will continue to operate until the humidity returns to normal, then the fan runs for the time set on the timer and turns off. Fa..
This fan is equippedwith a timer and a motion sensorwith a detection angle of 100°. If the sensor detects movement in its coverage area, the fan will automatically turn on and continue operating according to a timer from 2 to 30 minutes. Detection range up to 4 meters (detection angle max. 100°). Ve..
Specifications Option Size Voltage, V 230 Current frequency, Hz 50 Power consumption, W 20 Maximum air flow, m3/h 240 Current, A< /strong> 0.14 Noise level at a distance 3 m, dB(A) 33 Weight, kg< /strong> 0.85 Protection IP 34 Pipe size, mm 150 ..
Vents MV 100 plastic ventilation grille (this model has an anti-mosquito mesh) is designed to distribute air from supply and exhaust systems. In apartments and houses, ventilation exhaust shafts are covered with such grilles when the installation of household fans is not required. For easy cleaning ..
Vents MV 100 ventilation grille (this model without mesh) is designed to distribute air from supply and exhaust systems. In apartments and houses, ventilation exhaust shafts are covered with such grilles when the installation of household fans is not required. For easy cleaning of the grill, the ins..
Vents MV 101 s plastic ventilation grille is intended for use in ventilation systems. It consists of two parts - one is attached to the wall, ceiling or air duct using screws, the second front part is attached to the first with latches. To periodically clean the grille, simply release the latches an..
Vents MV 120 plastic ventilation grille is equipped with insect meshand has inclined blinds. The grille is an overhead grille, used in supply and exhaust ventilation systems. This grille is also used to decorate the openings of ventilation shafts. It consists of two parts - one part is attached to t..
Vents MV 125 ventilation grille has overall dimensions of 182x251 mm. The grille usesinclined louvres. Used in ventilation systems for mounting on air ducts or for installation on ventilation shafts in apartments or houses. The grille consists of two parts - the front grille and the landing part, ..
Electric heater Vents NK 100-0.8-1 with a power of 0.8 kW consists of a housing, a switching box and heating elements made of stainless steel. For a tight connection with air ducts, the heaters are equipped with rubber seals. NK duct heaters are equipped with two overheat protection thermostats: m..
Electric heater Vents NK 100-1,2-1 U with built-in temperature control is used to heat air in supply ventilation systems. To automatically maintain the air temperature in the duct at a given value, this series of NK heaters is equipped with a temperature control module (from 0.6 to 2.4 kW) or a cont..