The Vents VTSC 200 fan is a duct fan for connection to elements of a supply or exhaust ventilation system 200 mm in diameter. This model is equipped with an enginewith increased performance - up to 1100 m3/h. For installation on a wall or inside a wall, the fan housing is equipped with a mounting plate with dimensions400x400 mm. For rooms with increased requirements for noise levels, low-noise versions (VTs...B) are offered.
Options for the VTs series fan
Technical characteristics
| Parameter | Value |
| Voltage, V | 230 |
| Current, A< /strong> | 0.84 |
| Current frequency, Hz | 50 |
| < strong>Maximum power, W | 193 | Capacity, m3/h | 1100 |
| Rotation speed, min-1 | 2780 |
| Noise level at a distance of 3 m, dB(A) | 51 |
| Maximum temperature of transported air, C< /strong> | -25....+45 |
| Weight, kg | 6.1 |
| Protection, class | IPХ4 |
| Pipe size, mm | 200 |
Overall dimensions
Supply fan VTs-VK for wall mounting
Supply fan VTs-PK for wall mounting
< img src='/image/vent/vc_3.jpg' alt='Dimensions VTs-VN'>
Exhaust fan VTs-VN is mounted on the wall surface
Exhaust fan VTs-PN for installation on a wall surface
| Dimensions < /td> | ?D | ?d | ?D1 | H | H1 | L |
| mm | 198 | 6.1 | 339 | 400 | 385 | 138 |
Charts
Design
The fan housing is made of steel with a polymer coating. Various fan designs are available for wall or in-wall installation.
Motor
The single-phase external rotor motor is equipped with a centrifugal impeller with backward-curved blades. The engine is equipped with built-in thermal protection with automatic restart. For some standard sizes, a motor version with more powerful characteristics is available (VC…S). The use of rolling bearings in the engine ensures a long service life (40,000 hours). To achieve precise performance, low noise levels and safe fan operation, each turbine undergoes dynamic balancing during assembly. The motor in the fan has a protection class of IP 44.
Speed adjustment
Smooth or step adjustment is carried out using a thyristor or autotransformer. Several fans can be connected to one control device simultaneously, provided that the total power and operating current do not exceed the rated parameters of the controller.
It is possible to use a speed controller (supplied separately) RS-1-300
Installation
Fan Vents VTSS 200 is designed for wall (models VTs..PN and VTs..VN) or in-wall installation (models VTs..PK and VTs..VK) depending on the version (see below). Connection to the wall is carried out using a mounting plate. Power is supplied to the fan through the external terminal box. Electrical connection and installation must be carried out in accordance with the instructions and electrical diagram indicated on the terminal box.
Documentation
Fan passport
