Fan Domovent 100 S1

The Domovent 100 C1 fan is used for exhaust ventilation in apartments and houses. Installed in the exhaust duct directly or through the air duct. Provides air removal with a capacity of 94 m3/h, consumption does not exceed14 W per hour.

Specifications

Dimensions

< img src='/image/vent/vents_s_gab.gif' alt='Drawing of the Domovent 100 C fan' title='Drawing of the Domovent 100 C fan'>

Connection diagram

Design

• Thin front panel
• Insect mesh
• The fan housing and impeller are made of ABS engineering plastic. The material is resistant to damage and ultraviolet radiation.
• The aerodynamic shape of the impeller reduces consumption and increases service life
• Protection degree IP 34.
• The engine is equipped with overheating protection

How to control

The fan can be turned on:

• using a standard switch, for example combined with lighting
• using the regulator PC-1- 300, which can turn on the fan, change its performance and turn it off

It is possible to connect several fans to one controller. In this case, the performance of the connected fans will be adjusted simultaneously.

Switches and regulators are purchased separately.

How to install

The fan can be installed directly into the ventilation shaft opening or using a small air duct. Ceiling installation is allowed. When installing remotely, all joints must be sealed using sealant and clamps.

How to maintain

Household fans require periodic maintenance. Maintenance consists of periodically checking the condition of the terminal connections, cleaning the impeller and fan housing. Plastic parts must be cleaned using a soft cloth and soap solution. After cleaning, allow the parts to dry.

All servicing is carried out with the power turned off.

Passport

(pdf file, opens in a new tab)