The Vents 100 Flip exhaust fan has a very low noise level of 25 dBA, which is slightly above the human hearing threshold. The small dimensions of the front grille 160x160 mm allow you to use this model for ventilation of a bathroom or toilet when a small-sized fan is required. Installed with a branch pipe in the exhaust duct, ceiling installation in a suspended ceiling is allowed.
The Wave, Solid and Flip fan series differ from each other only in the appearance of the front grille.
Technical characteristics of the fan
| Parameter name | Value |
| Maximum productivity, m3/h< /td> | 85 |
| Consumption, W | 7.5 |
| Voltage, V | 220 |
| Current consumption, A | 0, 05 |
| Impeller rotation speed, min-1 | 2000 |
| Sound pressure level at a distance of 3 m, dBA | 25 |
| Weight, kg | 0.51 |
| Protection class | IP 44 |
| Pipe size , mm | 100 |
Dimensions
Description of the fan
- Low noise and consumption. If you need to achieve completely silent operation, you can use the RS-1-300 performance controller (purchased separately). The regulator can turn the fan on and off and regulate performance.
- 24-hour or short-term operation is allowed.
- Consumption 7.5 W per hour.
- The housing and impeller are made of ABS plastic white. The material is impact-resistant, wear-resistant and does not emit harmful substances.
- The Vents Flip 100 fan is equipped with a check valve to prevent air from entering the shaft into the room being served.
Control
The fan can be turned on:
- from a separate switch (not included in the delivery package),
- turned on together with the lighting
- turned on from the PC regulator -1-300, which can also be used to regulate the performance of the hood.
Connection diagram
Scheme of connecting the fan to the network. Switching on is done by an external switch or from the light switch.
Installation of the fan
The fan can be installed directly from the pipes into the ventilation shaft or through a short flexible or plastic air duct. The length of the air duct should be as short as possible, since the fan is axial and cannot create high pressure.
During installation, all connections between the fan pipe and the air duct or shaft must be sealed using sealant, clamps or mounting tape. If the hole in the wall is larger than the fan pipe, then you can use a rectangular wall plate with a round hole for mounting, which is purchased separately.
The fan housing is attached to the surface of the wall or ceiling using four self-tapping screws, which are supplied.
Installation example
Warranty
The warranty for this fan model is 60 months (5 years) subject to compliance with the rules of transportation, storage, installation and operation.
