This fan VentsQuiteline100T is equipped with a timer to turn off the fan (from 2 to 30 minutes).< /p>
Designed for use in supply or exhaust ventilation systems. The fan is a duct fan, that is, it is built directly into a network of air ducts or plastic channels. This series of fans has a reduced noise level (this size Vents 100 Quietline is silent) with a low level of energy consumption, which allows them to be installed directly in the rooms served by ventilation.
Design features
Thanks to the company’s own development 'Vents' managed to significantly reduce the noise level. Aerodynamic performance was achieved through a reasonable combination of the shape of the impeller and the rotation speed of the fan motor. The impeller in the fan is mounted on the electric motor shaft.
The fan housing and impeller are made of high-quality plastic, resistant to ultraviolet radiation. The fan uses a single-phase two-speed motor. Built-in protection is used to protect against engine overheating.
Technical characteristics of the fan
| Parameter | Value |
| Productivity, m3/h | 100 |
| Power consumption, W | 7.5 |
| Voltage, V | 220 |
| Current, A | 0.049 |
| Impeller rotation speed, min-1< /td> | 2100 |
| Noise level at a distance of 3 m, dBA | < td style='text-align: center,'>25|
| Weight, kg | 0.61 |
| Protection | IP X4 |
| Pipe size, mm | 100 |
Dimensions
| Dimensions | D | L |
| mm | 99 | 137.5 |
Scheme for connecting the fan to the network
How a fan with a timer works
The fan starts working when power is supplied from an external switch. After turning off the external switch, the fan will continue to operate for the time set on the timer (from 2 to 30 minutes) after which it will turn off and go into standby mode.
To connect a fan with a Vents Quietline 100 T timer, a two-phase supply is required - to terminal L and terminal LT.
How to install a fan
- Vents 100 Quietline Duo fan is connected to an air duct with a diameter of 100 mm. If the duct diameter is smaller or larger, use a reducer or connector. When installed with flexible air ducts, the fan is secured using clamps.
- The fan can be installed in a horizontal or vertical position. When installed vertically, it is necessary to provide protection against condensation or precipitation.
- The fan is intended for indoor installation only, outdoor installation is not allowed.
Installation examples
