This Vents 100 Style T fan model is equipped with a fan shutdown delay timer. As standard, this series of exhaust fans is equipped with an automaticallyclosing front panel. When the fan is turned off, the front panel of the fan smoothly closes and blocks the exhaust duct. Equipped with bearings, has a low noise level.
An exhaust fan with a timer is often used to ventilate rooms such as a toilet or bathroom. The delay time can be set from 2 to 30 minutes.
Technical characteristics of the fan
| Parameter name | Value |
| Maximum productivity, m3/h | 97 | Consumption, W | 9 |
| Voltage, V | 220 |
| Current consumption, A | 0.059 |
| Impeller rotation speed, min-1 | 2165 |
| Sound pressure level at a distance of 3 m, dBA | 25 |
| Weight, kg | 0.55 |
| Protection class | IP 44 |
| Pipe size , mm | 100 |
Dimensions
< img src='/image/vent/1_bitovie/style/razmery-9821.gif' alt='Dimensions in the drawing' '=''>
| Dimensions | a | b | c | d | e |
| mm | 175 | 221 | 77 | 99 | 39 |
Features
- Used for exhaust ventilation of a bathroom, toilet, kitchen or other room.
- The successful combination of the design of the fan housing, the impeller and the use of bearings made it possible to achieve very quiet operation of the fan and reduce consumption in one hour to 9 W.
- When the fan is turned off, the exhaust duct is automatically closed. The front panel is equipped with a thermal actuator, which ensures smooth opening or closing.
- The motor uses rolling bearings, which reduces the noise level, increases the reliability and service life of the hood.
- The fan has a protection class of IP44, which allows it to be used in wet rooms. All electrical connections are protected by a sealed silicone cover
- For service cleaning, the fan unit can be easily removed from the pipe, as shown in the figure below
Operation scheme
The fan allows you to increase the efficiency of air removal in rooms such as a toilet, bathroom or kitchen . The convenience is that you can set the duration of the hood operation using a timer. Below is the algorithm for how this model works.
Connection diagram
The following wires must be connected to the terminal block in this modification of the 100 Quiet T fan:
- straight phase to terminal L
- phase through the light switch to terminal LT
- zero to terminal N
Thus, for proper operation of the fan to the fan < strong>it is necessary to connect two wireswith a phase, one from the switch, the second with a constant phase.
Fan installation
The fan is designed for installation in the built-in exhaust duct of an apartment or house. Mounted directly with a pipe into the duct or through a small section of the air duct. The fan is axial and cannot be connected to a very long duct, this will reduce the performance and increase the noise level. The recommended length of the air duct is no more than 0.5 meters. It is also recommended to avoid turning the duct whenever possible, this will also affect performance and noise levels.
When installing the fan directly into an exhaust shaft, make sure that the fan pipe does not block the exhaust duct.
Warranty
Warranty for the fan - 60 months (5 years) subject to compliance with the rules of transportation, storage, installation and operation. During this period, the manufacturer guarantees the normal operation of the equipment.
Documentation
You can download the passport, installation and operating instructions by clicking on the image below (pdf file 1.6 MB, will open in a new tab)
