Technical characteristics of the Vents VKO 125 fan
| Option | Size | Unit of measurement | ||
| Tension | 220-240 | B | ||
| Current frequency | 50 | Hz | ||
| Maximum power | 16 | W | ||
| Performance | 185 | m3/h | ||
| Tok | 0.1 | A | ||
| Rotation speed | 2400 | min-1 | ||
| Noise level at a distance of 3 m | 38 | dB(A) | ||
| Weight | 0.41 | kg | ||
| Protection | IP X4 | class | ||
| 125 | mm | |||
| Dimensions | ?D | < td style='background-color: #b9c4ca,'>?D1L | L1 | |
| mm | 125 | 129 | 93 | 31 |
Diagram
Scheme for connecting the fan to the network
Description of the fan
- Continuous or periodic ventilation of bathrooms, showers, kitchens and other domestic premises .
- Exhaust or supply ventilation depending on the fan installation option in the system.
- For use with a system of plastic PVC ducts or flexible ducts.
- Small and medium movement magnitude of air flow over short distances with low resistance of the ventilation system.
- For installation with 125 mm air ducts.
Design
- Casing and The impeller is made of high-quality and durable ABS plastic, resistant to ultraviolet radiation.
- The design of the impeller increases the efficiency of the fan and the service life of the motor.
- Protection degree IP X4.
Motor
- Reliable motor with low power consumption.
- Designed for continuous operation and does not require maintenance.
- Equipped with overheating protection.< /li>
Control
Manual:
- The Vents VKO 125 fan is controlled via a room light switch. The switch is not included in the delivery.
- Speed adjustment can be carried out using a thyristor regulator (see Electrical accessories). Fans can be connected several at a time to one control device.
Automatic:
- Using an electronic control unit BU-1-60(see Electrical accessories). The control unit is supplied separately.
Installation features
- The Vents VKO 125 fan is installed in a duct of the appropriate cross-section. When installed with flexible air ducts, it is secured using clamps.
- Fans of this series have different diameters of inlet and outlet pipes for the possibility of connecting a decorative grille of the MV series with a flange of the corresponding diameter on the air intake side ( when installing the fan directly into the hole in the ventilation shaft or in place of an existing ventilation grille).
- The fan can be installed on a horizontal or vertical flat surface using a mounting bracket (model VKO1k). li>
- It is possible to install 2 fans in series to increase the pressure.
Installation examples
Vents VKO fan passport
