Specifications
| Option | Size |
| Voltage, V | 230 |
| Current frequency, Hz | 50 |
| Power consumption, W | 9.3 |
| Maximum air flow, m3/h | 148 |
| Current, A< /strong> | 0.06 |
| Noise level at a distance 3 m, dB(A) | 31 |
| Weight, kg< /strong> | 0.69 |
| Protection | IP 34 |
| Pipe size, mm | 125 |
Dimensions
| ?D | B | H< /td> | L | L1 |
| 125 | 176 | 140 | 114 | 13 |
Scheme for connecting the fan to the network< /h3>
Scheme for connecting a fan without a built-in switch to the network
Application
- Designed for periodic or continuous exhaust ventilation of toilets, bathrooms, shower cabins, kitchens and other rooms
- Low noise level - 31 dB(A)
- Mounted in a ventilation shaft or in a ceiling or wall with an air duct with a diameter of 125 mm (not included in the delivery, ordered separately if necessary )
Design
- The fan impeller and its housing are made of high-quality durable plastic. The plastic is inert to sunlight
- Due to the improved design of the fan impeller, the engine life is increased and the noise characteristics are reduced*
- The fan is equipped with a mesh to prevent insects from getting inside
- Degree motor protection IP 34.
*Silent fans only size 100 mm (Silent 100 s modifications), fans of this size - Silenta 125 have higher performance and a higher noise level - 31 dB(A).
Motor
- Reliable motor with minimal power consumption of 9.3 W
Motor
- Reliable motor with minimal power consumption of 9.3 W
- The engine does not require maintenance, constant operation is allowed
- Built-in overheating protection.
Control
Manual:
- The fan is controlled using the room light switch. The switch is not included in the delivery.
- Speed adjustment can also be done manually using a thyristor regulator (see Electrical accessories). Fans can be connected several at a time to one control device.
Automatic:
- using a fan control unit (ordered separately ). The control unit allows you to set the fan on and off mode: by timer, by motion sensor, by humidity sensor
Installation features
- The fan is installed directly into the ventilation duct of the ventilation shaft premises. If necessary, it is possible to use an additional air duct (flexible or plastic).
- The fan is attached to the wall or ceiling using screws
- Installing the fan is a simple procedure accessible to everyone
An example of installing a Vents 125 Silenta S fan in an apartment
Fan passport
Video connection and installation of the Vents Silenta-S fan
