The Vents 125 K fan is an exhaust fan without sensors. Designed for continuous or periodic exhaust ventilation of domestic premises for private or commercial purposes. The fan is built directly into the ventilation shaft or connected to a small air duct with a cross-section of 125 mm. Since the fan is axial and cannot create high pressure, the length of the air duct should not exceed 1 meter.
Specifications
| Parameter | Value |
| Voltage, V | 220 |
| Current frequency, Hz | 50 |
| Maximum power, W | 16 |
| Capacity, m3/h | 180 |
| < strong>Current, A | 0.1 |
| Rotation speed, min-1 | 2400 |
| Noise level at a distance of 3 m, dB(A) | 35 |
| Weight, kg | 0.63 |
| Protection, class | IP34 |
| Pipe size, mm < /br> | 125 |
Overall dimensions
| Dimensions | ?D | B | H | L | L1 |
| mm< /strong> | 125 | 187 | 142 | 100 < /td> | 15 |
Connection diagram
Application
- Continuous or periodic exhaust ventilation of bathrooms, showers, kitchens and other domestic premises.
- For installation in ventilation shafts or connection with air ducts.
- Moving small and medium-sized air flow over short distances with low resistance of the ventilation system.
- For installation with air ducts 125 mm.
Design
- Classic design and aesthetic appearance.
- The body and impeller are made of high-quality and durable ABS plastic, resistant to ultraviolet radiation.
- The design of the impeller increases the efficiency of the fan and the service life of the motor.
- Protective insect net.
- Protection degree IP 34. < /ul>
- Reliable motor with low power consumption.
- Designed for continuous operation and does not require maintenance.
- Equipped with overheating protection .
- The fan is controlled using the room light switch. The switch is not included in the delivery.
- Speed control can be carried out using a thyristor regulator (see Electrical accessories). Fans can be connected several at a time to one control device.
- Using an electronic control unit BU-1-60(see Electrical accessories). The control unit is supplied separately.
- The fan is installed directly into the opening of the ventilation shaft.
- If the ventilation shaft is located remotely, it is possible use of flexible air ducts. The air duct is connected to the fan outlet flange using a clamp.
- Attached to the wall with screws.
- Can be used for ceiling mounting.
Motor
Control
Manual:
Automatic:
How to install the fan
Example installation
Fan passport
