This fan is equipped with a pull cord switch.
Technical specifications
| Parameter | Value |
| Voltage, V | 220 |
| Current frequency, Hz < /br> | 50 |
| Maximum power , Tue | 14 |
| Productivity, m3/h | 95 |
| Current, A | 0.085 |
| Rotation speed, min-1 | 2300 |
| Noise level at a distance of 3 m, dB(A) < /strong> | 34 |
| Weight, kg | 0.59 |
| Protection, class | IP34 |
| Pipe size, mm | 100 | < /tr>
Dimensions
| Dimensions | ?D | B | H | L | L1 |
| mm | 100 | 150 | 120 | 108 | 12 |
Connection diagram
Scheme for connecting a fan with a built-in switch to the network
Application
- Continuous or periodic exhaust ventilation of bathrooms, showers, kitchens and other domestic premises.
- For installation in ventilation shafts or connections to air ducts.
- Moving small and medium air flows over short distances with low resistance of the ventilation system.
- For installation with 100 mm air ducts.
Design
- Modern design and aesthetic appearance.
- The body and impeller of the Vents 100 SV fan are made of high-quality and durable ABS plastic, resistant to ultraviolet radiation.
- The design of the impeller allows you to increase the efficiency of the fan and the service life of the engine.
- > Ultra-thin front panel.
- Insect protection.
- IP 34 protection level.
Motor
- Reliable motor with low energy consumption.
- Designed for continuous operation and does not require maintenance.
- Equipped with overheating protection.
Control
Manual:
- The fan is controlled using the room light switch. The switch is not included in the delivery.
- The fan is controlled via a built-in cord switch “B”. When the fan is mounted on the ceiling, this option is not used.
- Speed control can be carried out using a thyristor regulator (see Electrical accessories). Fans can be connected several at a time to one control device.
Automatic:
- Using an electronic control unit BU-1-60(see Electrical accessories). The control unit is supplied separately.
Installation features
- The fan is installed directly into the ventilation shaft opening.
- When the ventilation shaft is located remotely, it is possible to use flexible air ducts. The air duct is connected to the fan outlet flange using a clamp.
- Attached to the wall with screws.
- Can be used for ceiling mounting.
Example fan installation
Fan passport
