Fan Vents iFan 100 Celsius

The Vents iFan 100 Celsius fan is a surface-mounted fan and is used to move warm air from one room to another colder one. Built-in automation allows you to select a convenient fan operating mode based on the temperature sensor.

Intelligent built-in fan control functions allow you to configure the fan mode depending on the consumer's requirements. The fan thickness is only 30 mm.

Specifications

Fan dimensions

< img src='/image/vent/6280_schema.jpg' alt='Drawing with dimensions of a Celsius fan'>

Fan features

Quiet operation

Thanks to a successful design solution, the shape of the impeller made it possible to achieve a very quiet noise level from 22 to 31 dBA (depending on depending on the fan operating mode). The quietest operating mode is almost inaudible.

Appearance

The front grille has a streamlined shape, the body has no sharp corners. The Vents iFan 100 Celsius fan can be adapted to different design styles; additionally, you can order front grilles in other colors.

Fan control

Fan control is possible both from the panel on the fan and from control panel.

Control panel.

Remote control

1. Turn on/off the fan< /li>
2. Selecting the Silent warm air removal mode
3. Selecting the Max warm air removal mode
4. Setting the Silent mode speed
5. Setting the Max mode speed
6. Setting the turn-on delay timer (0, 2 or 5 minutes)
7. Setting the turn-off delay timer (5, 15 or 30 minutes)
8. Turning on / off the “Pause” mode ( stopping the fan operation for 45 minutes)
9. Setting the temperature sensor response threshold
10. Enabling the 24 HOURS constant ventilation mode
11. For the VENTS iFan CELSIUS model, the button on the remote control is not active (it is intended for for the VENTS iFan MOVE model)

Removable fan motor

• Maintenance-free ball bearings are used
• Fan energy consumption is only 3.8 W
• To absorb vibration, rubber vibration-damping inserts are used on which the motor is installed, which ensures silent fan operation
• Built-in motor overheating protection
• The motor is easily removed for maintenance

Easy installation

The Vents iFan 100 Celsius fan can be mounted directly on the hole or using replaceable pipes that come included for installation in an existing ventilation duct.

Fan capabilities and modes

Temp. mode

Managing warm air removal modes

Selecting Silent or Max warm air removal mode at a given temperature threshold.

Silent – active temperature control mode with a capacity of up to 83 m3/h.

Max – active mode of response to temperature increases with a capacity of up to 133 m3/h. When the temperature threshold set by the user is exceeded, the fan will switch to increased speed to remove excess heat. After the room temperature drops 2 °C below the set threshold, the fan will switch to the previous mode.

Timer

Managing the fan on/off delay time

Setting the delay time for turning on / off the fan after a signal from an external switch:

• setting the delay time for turning on the fan at increased speed - 0, 2 or 5 minutes (in combination with the button SWITCH DELAY),
• setting the shutdown delay time for final air removal - 5, 15 or 30 minutes.

Speed

Fan speed control / temperature threshold setting

Using the SPEED “+” and SPEED “–” buttons in combination with the TEMPERATURE button, set the temperature threshold at which the fan turns on or goes to high speed. Temperature selection range from 18 to 36 °C.

The default temperature is 24 °C.

Status

Indication of fan operating mode

• The indicator is green - the fan is working when the external switch is triggered.
• The indicator is flashing green once every 2 seconds - the fan is in standby mode.
• The indicator is red - the fan is working in 24 hour mode.
• The indicator flashes red once every 2 seconds - the fan is operating in the warm air removal mode.
• The indicator alternately flashes green and red - the fan is operating in the interval ventilation mode .
• The indicator flashes red 2 times every 1 second - the fan is working on the turn-on delay.

24 Hours

Continuous ventilation mode 24 hours

The button allows you to activate the constant ventilation mode at a minimum speed of 33 m3/h (? 100 mm) or 40 m3/h (? 125 mm) until the temperature sensor and the external switch are activated.

By default, 24 HOURS mode is disabled.

Pause

Pause

Control of the PAUSE function is only possible from the remote control. Pressing the PAUSE button pauses the fan for 45 minutes. After this period of time has elapsed or the PAUSE button is pressed again, the fan returns to the previous operating mode.

Interval ventilation

After every 15 hours of inactivity, the fan automatically turns on and ventilates the room for 2 hours with a capacity of 72 m3/ h (?100 mm) or 83 m3/h (?125 mm). A signal from the temperature sensor or the operation of an external switch returns the fan to the previous operating mode.

Examples of installation of the Vents iFan Celsius fan

Fan passport

Warranty

The product warranty period is 60 months (5 years)from the date of sale of the product, provided that the consumer complies with the rules of transportation, storage, installation and operation.