The Domovent 125 Tisha fan is equipped with bearings and a check valve. Used for exhaust ventilation in bathrooms, bathrooms or kitchens. Consumption does not exceed 18 W, noise level is 34 dBA.
Specifications
| Parameter | Value |
| Voltage, V | 220-240 |
| Current frequency, Hz | 50 |
| Power consumption, W | 18 |
| Maximum air flow, m3/h | 160 |
| Current, A | 0.11 |
| Noise level at a distance of 3 m, dB(A) | 34 |
| Weight, kg | 0.8 |
| Protection | IP 44 |
| Pipe size, mm | 125 |
Dimensions
| D < /td> | B | L | L1 |
| 123.5 | 180 | 85 | 21 |
- Bearings are used in the electric motor, which increases service life and reduces consumption
- Aerodynamic shape of the impeller to reduce noise level
- Check valve prevents air entering from the shaft when the fan is turned off
- Built-in protection of the electric motor from overheating
- Protection class IP44
How to turn it on
Fan can be turned on:
- using a standard switch, for example, combined with lighting
- using a regulator PC-1-300, which can turn on the fan, change its performance and turn it off
It is possible to connect several fans to one regulator. In this case, the performance of the connected fans will be adjusted simultaneously.
How to connect
The fan is powered from a 220 V network. Below is a diagram for connecting the fan when using an external switch.
When connecting the fan to the regulator, you must follow the connection diagram specified in the regulator's passport.
Installation
The fan can be installed in the exhaust shaft directly or through a small air duct. When installed through an air duct, the noise level increases slightly and the hood performance decreases. When installing the fan directly into the shaft, make sure that there is enough space from the fan pipe to the shaft wall for normal operation of the fan. This affects performance and noise level.
All connections between the fan and the air duct must be sealed using clamps and sealant.
Instructions for installing directly into a wall
- Turn off the supply power
- Remove the fan grille
- Attach the fan housing to the shaft opening, mark the holes.
- Make holes in the wall
- Attach using self-tapping screws fan
- Install the front grill
- Apply power to the electrical network.
Warranty
Manufacturer's warranty on the fan is 24 months (2 years )subject to compliance with the rules of operation, installation, transportation and storage.
