This fan is equipped with a timer and humidity sensor.
If the humidity in the room exceeds the value set on the sensor of 60-90%, the fan will automatically turn on and will continue to work until the humidity returns to normal, then the fan works out the time set on the timer and turns off
Technical characteristics
| Parameter | Value |
| Voltage, V | 220 |
| Current frequency, Hz | 50 |
| Maximum power, W | 14 | < /tr>
| Capacity, m3/h | 95 |
| Current, A | 0.085 |
| Rotation speed, min-1 | 2300 |
| Noise level at a distance of 3 m, dB(A) | 34 |
| < strong>Weight, kg | 0.59 |
| Protection, class | IP34 |
| Pipe size, mm | 100 |
Dimensions
| Dimensions | ?D | B | H | L | L1 |
| mm | 100 | 150 | 120 | 108 | 12 |
Connection diagram
< p>
Application
- Continuous or periodic exhaust ventilation of bathrooms, showers, kitchens and other domestic premises.
- For installation in ventilation shafts or connection to air ducts.
- Moving small and medium-sized air flow over short distances with low resistance of the ventilation system. < li>For installation with 100 mm air ducts.
Design
- Modern design and aesthetic appearance.
- Vents fan housing and impeller 100 STN are made of high-quality and durable ABS plastic, UV-resistant.
- The design of the impeller increases the efficiency of the fan and the service life of the motor.
- Ultra-thin front panel.
- Insect protection net.
- Protection degree IP 34.
Motor
- Reliable motor with low energy consumption. < li>Designed for continuous operation and does not require maintenance.
- Equipped with overheating protection.
Installation features
- The fan is installed directly into opening of the ventilation shaft.
- When the ventilation shaft is located remotely, it is possible to use flexible air ducts. The air duct is connected to the fan outlet flange using a clamp.
- Attached to the wall with screws.
- Can be used for ceiling mounting.
Example installation
Fan passport
