The Vents 100 HTN fan is equipped with a timer and humidity sensor.
If the humidity in the room exceeds the value set on the sensor of 60-90%, the fan will will automatically turn on and continue operating until the humidity returns to normal, then the fan works out the time set on the timer and turns off
Technical characteristics
| Parameter | Value |
| Voltage, V | 220 |
| < strong>Current frequency, Hz | 50 | Maximum power, W | 14 |
| Capacity, m3/h | 89 |
| Current, A | 0.085 |
| Rotation speed, min-1 | 2300 |
| Noise level at a distance of 3 m, dB( A) | 33 |
| Weight, kg | 0.61 |
| Protection, class | IP34< /td> |
| Pipe size, mm | 100 |
Dimensions
| Dimensions | ?D | B< /strong> | H | L | L1 |
| mm | 100 | 183 | 120 | 151 | 58 |
Connection diagram
Application
- Continuous or periodic exhaust ventilation of bathrooms, showers, kitchens and other domestic premises.
- For installation in ventilation shafts or connection to air ducts.
- Moving small and medium-sized air flow over short distances with low resistance.
Design
- Modern design and aesthetic appearance.
- The body and impeller of the Vents 100 XTN fan are made of high-quality and durable ABS plastic, resistant to ultraviolet radiation.
- The design of the impeller allows you to increase the efficiency of the fan and the service life of the motor.
- Decorative interchangeable color inserts included - blue, light green, yellow and pink.
- Protection degree IP 34.< /li>
Motor
- Reliable motor with low power consumption.
- Designed for continuous operation and does not require maintenance.
- Equipped with protection against overheating.
Installation features
- The fan is installed directly into the opening of the ventilation shaft.
- When the ventilation shaft is located remotely, it is possible to use flexible air ducts. The air duct is connected to the fan outlet flange using a clamp.
- Attached to the wall with screws.
- Can be used for ceiling mounting.
Example installation
