Vents 125 LDVTN is a fan for exhaust ventilation, equipped with atimer and humidity sensor and pull cord switch.
If the humidity in the room exceeds the set value sensor value is 60-90%, the fan will automatically turn on and continue operating until the humidity returns to normal, then the fan runs for the time set on the timer and turns off. The fan is supplied with voltage when the pull cord switch is activated. The humidity sensor and timer are installed inside the fan.
Technical characteristics
| Parameter | Value |
| Voltage, V | 220 |
| Current frequency, Hz < /td> | 50 |
| Maximum power, W | 16 |
| Capacity, m3/ h | 167 |
| Current, A | 0.1 |
| Rotation speed, min-1 | 2400 |
| Noise level at a distance of 3 m, dB(A) | 34 |
| Weight, kg | 0.74 |
| Protection, class | IP34 |
| Pipe size, mm | 125 |
Dimensions
| Dimensions | ?D | B | H | L | L1 |
| mm | 125 | 177 | 140 | 135 | 34 |
Connection diagram
Application
- Continuous or periodic exhaust ventilation of bathrooms, showers, kitchens and others domestic premises.
- For installation in ventilation shafts or connection to air ducts.
- Moving small and medium-sized air flow over short distances with low resistance of the ventilation system.
Design
- Modern design and aesthetic appearance.
- The body, impeller and front panel of the Vents 125 LDVTN fan are made of high-quality and durable ABS plastic, UV-resistant .
- Various decorative overlays are available for the front panel made of natural aluminum.
- The design of the impeller increases the efficiency of the fan and the service life of the motor.
- Protection degree IP 34.< /li>
Motor
- Reliable motor with low power consumption.
- Designed for continuous operation and does not require maintenance.
- Equipped with overheating protection
Installation features
- The fan is installed directly into the opening of the ventilation shaft.
- When the ventilation shaft is located remotely, it is possible to use flexible air ducts The air duct is connected to the fan outlet flange using a clamp.
- Attached to the wall with screws.
- Can be used for ceiling mounting.
