Fan with motion sensor Vents 100 Silenta MTP will automatically turn on when a person appears at a distance of 1-4 meters at a detection angle of max. 100°. After the person leaves the room, the fan will continue to operate for the time set on the timer and turn off. The shutdown delay time can be set from 2 to 30 minutes.
This Vents 100 Silenta MTP fan is intended for exhaust ventilation of domestic or commercial premises. The main consumer feature of this model is its very low noise level - 26 dBA. This model is so quiet that you can hardly hear the fan when it is running. Such fans are most often used for ventilation of a bathroom, shower or bathroom; its protection class allows it to be used in wet rooms.
Application
- Continuous or periodic exhaust ventilation of bathrooms, showers, kitchens and other domestic premises.
- Ventilation of rooms with high noise level requirements.
- For installation in ventilation shafts or connection to air ducts.
- For installation with 100, 125 and 150 mm air ducts.
- Modern design and aesthetic appearance.
- The housing and impeller are made of high-quality and durable ABS plastic, UV-resistant.
- Design impeller allows you to increase the efficiency of the fan and the service life of the motor.
- The special design of the fan and motor ensures its silent operation.
- Protection degree IP 34.
Motor
- Reliable motor with minimum power consumption of only 5.5 W (for 100 mm diameter).
- Designed for continuous operation and requires no maintenance.
- Equipped with overheating protection.
Technical characteristics
| Parameter | Value |
| 230 | |
| Current frequency, A | 50 |
| Power consumption, W < /td> | 5.5 |
| Maximum air flow, m3/h | 78 |
| < strong> Current, A | 0.035 |
| Noise level at a distance of 3 m,dB(A) | 26 |
| Weight, kg | 0.48 |
| Protection, class | IP34 |
Overall dimensions
| D | B | H | L < /td> | L1 |
| 100 | 159 | 135 < /td> | 89 | 23 < /td> |
Aerodynamic characteristic
Dependence of fan performance on pressure
Installation features
- The fan is installed directly into the opening of the ventilation shaft.
- When the ventilation shaft is located remotely, it is possible to use flexible air ducts. The air duct is connected to the fan outlet flange using a clamp.
- Attached to the wall with screws.
- Can be used for ceiling mounting.
Example installation
Connection diagram
Connection diagram for a fan without a built-in switch to the network
