Vents 150 LDTN is an exhaust fan that is equipped with a timer and a humidity sensor.
If the humidity in the room exceeds the value set on the sensor 60-90 %, then the fan will automatically turn on and continue operating until the humidity returns to normal, then the fan works out the time set on the timer and turns off
Technical characteristics
| Parameter | Value |
| Voltage, V | 220 |
| Current frequency, Hz | 50 | < /tr>
| Maximum power, W | 32.1 |
| Capacity, m3/h | 255 |
| Current, A | 0.23 |
| Rotation speed, min-1 | 2340 |
| Noise level at distance 3 m, dB(A) | 44 |
| Weight, kg | 0.74 |
| Protection, class | IP34 |
| Pipe size, mm | 150 |
Overall dimensions
| Dimensions | ?D | B | H | L | L1 |
| mm | 150 | 206 | 165 | 154 | 36 |
Connection diagram
Application
- Continuous or periodic exhaust ventilation of bathrooms, showers, kitchens and other domestic premises.
- For installation in ventilation shafts or connection to air ducts.
- Moving small and medium-sized air flow over short distances with low resistance of the ventilation system.
- Modern design and aesthetic appearance.
- The body, impeller and front panel of the Vents 150 LDTN fan are made of high-quality and durable ABS plastic, resistant to ultraviolet radiation.
- Various decorative overlays are available for the front panel made of natural aluminum.
- The design of the impeller increases the efficiency of the fan and the service life of the motor.
- Protection degree IP 34.
- Reliable motor with low energy consumption.
- Designed for continuous operation and does not require maintenance.
- Equipped with overheating protection
- The fan is controlled using a room light switch . The switch is not included in the delivery.
- Speed control can be carried out using a thyristor regulator (see Electrical accessories). Fans can be connected several at a time to one control device.
- When using the electronic control unit BU-1-60 (see Electrical accessories). The control unit is supplied separately.
- The fan is installed directly into the opening of the ventilation shaft.
- When the ventilation shaft is located remotely, it is possible to use flexible air ducts. The air duct is connected to the fan outlet flange using a clamp.
- Attached to the wall with screws.
- Can be used for ceiling mounting.
Design
Motor
Control
Manual:
Automatic:
Installation features
Example installation
Fan passport
