This fanis equipped with a timer.
After disconnecting from the mains, the fan continues to operate for the time set by the timer from 2 to 30 minutes.
Technical fan characteristics
| Option | Size | Unit of measurement | |||
| Voltage | 220-240 | B | |||
| Current frequency | 50 | Hz | |||
| Maximum power | 16 | W | |||
| Performance | 185 | m3/h | |||
| Tok | 0.1 | A | |||
| Rotation speed | 2400 | min-1 | |||
| Noise level at a distance of 3 m | 35 | dB(A) | |||
| Weight | 0.7 | kg | |||
| Protection | IP 34 | class | |||
| 125 | mm |
| Dimensions | ?D | B | H | L | L1 |
| mm | 125 | 180 | 150 | 94 | 25 |
Scheme for connecting the fan to the network
How a fan with a timer works
A fan with a timer is activated by an external switch, this can be a light switch.
Application
- Continuous or periodic exhaust ventilation of bathrooms, showers, kitchens and other domestic premises.
- For installation in ventilation shafts or connection to air ducts.
- Moving small and medium magnitude of air flow over short distances with low resistance of the ventilation system.
- For installation with 125 mm air ducts.
Design
- Modern design and aesthetic appearance.
- The housing and impeller are made of high-quality and durable ABS plastic, resistant to ultraviolet light.
- The design of the impeller increases the efficiency of the fan and the service life of the motor. < li>Protective insect net.
- Protection degree IP 34.
Motor
- Reliable motor with low energy consumption.
- Designed for continuous operation and does not require maintenance.
- Equipped with overheating protection.
Control
Manual:< /strong>
- The fan is controlled using the room light switch. The switch is not included in the delivery.
Installation features
- The fan is installed directly in the opening of the ventilation shaft or used for ceiling installation with connection to the air duct.
- When the ventilation shaft is located remotely, it is possible to use flexible air ducts. The air duct is connected to the fan outlet flange using a clamp.
- Attached to the wall with screws.
Installation example
M series fan passport
Video guide on fan installation
From the same brand
For connection to an air duct with a diameter of 315 mm of an air duct at a right angle with a diameter of 250 mm. The round ventilation tee 315/250 m..
35.07 €
Ex Tax:35.07 €
Flange for round air duct FMK 315 is designed for connecting flexible ducts and plastic air ducts to a ventilation hole in a wall or ceiling. The prod..
23.46 €
Ex Tax:23.46 €
The FMK 100 ventilation flange is designed for connecting flexible ducts and plastic air ducts to a ventilation hole in a wall or ceiling. The product..
9.69 €
Ex Tax:9.69 €
The flange for round air duct FMK 100 Ts is designed for connecting flexible ducts and plastic air ducts to a ventilation hole in a wall or ceiling. T..
9.62 €
Ex Tax:9.62 €
The FMK 125 Ts ventilation flange is designed for connecting flexible ducts and plastic air ducts to a ventilation hole in the wall or ceiling. The pr..
10.42 €
Ex Tax:10.42 €
For connection to an air duct with a diameter of 315 mm of an air duct at a right angle with a diameter of 250 mm. The round ventilation tee 315/250 m..
35.07 €
Ex Tax:35.07 €
Basic information roof passage for Aerostar TR 40 fansRoof transitions are used as a connecting element between Aerostar SRV/ARV series roof fans and ..
113.97 €
Ex Tax:113.97 €
Basic information roof passage for fans Aerostar TR 63Roof transitions are used as a connecting element between Aerostar SRV/ARV series roof fans and ..
142.91 €
Ex Tax:142.91 €
Flange for round air duct FMK 315 is designed for connecting flexible ducts and plastic air ducts to a ventilation hole in a wall or ceiling. The prod..
23.46 €
Ex Tax:23.46 €
The FMK 100 ventilation flange is designed for connecting flexible ducts and plastic air ducts to a ventilation hole in a wall or ceiling. The product..
9.69 €
Ex Tax:9.69 €