Domovent 100 C1B fan with built-in cord switch. Used for exhaust ventilation in apartments and houses. Installed in the exhaust duct directly or through the air duct. Provides air removal with a capacity of 94 m3/h, consumption does not exceed14 W per hour.
The fan is turned on and off using a switch cord attached to the fan body. Such fans are most often used for kitchen ventilation.
Technical characteristics
| Parameter | Value | Voltage, V | 220 |
| Current frequency, Hz | 50 |
| Maximum power, W | 14 |
| Productivity, m3/h | 94 |
| Current, A | 0.085 |
| Rotation speed, min-1 | 2300 |
| Noise level at a distance of 3 m, dB(A) | 39 |
| Weight, kg | 0.59 |
| Protection, class | IP34 |
| Pipe size, mm | 100 |
Dimensions
| Dimensions | ?D | B | H | < td class='text-center'>L*L1 | |
| mm | 100 | 150 | 120 | 93 | 12 |
Connection diagram
Design
- Thin front panel
- Insect mesh< /li>
- The fan housing and impeller are made of ABS engineering plastic. The material is resistant to damage and ultraviolet radiation.
- The aerodynamic shape of the impeller reduces consumption and increases service life
- Protection degree IP 34.
- The engine is equipped with overheating protection
How to control
The fan can be turned on:
- using a switch cord attached to the front grille of the fan
How to install
The fan can be installed directly into the ventilation shaft opening or using a small air duct. Ceiling installation is allowed. When installing remotely, all joints must be sealed using sealant and clamps.
How to maintain
Household fans require periodic maintenance. Maintenance consists of periodically checking the condition of the terminal connections, cleaning the impeller and fan housing. Plastic parts must be cleaned using a soft cloth and soap solution. After cleaning, allow the parts to dry.
All servicing is carried out with the power turned off.
Passport
(pdf file, opens in a new tab)
