This fan is equipped with a timer and humidity sensor.
If the humidity in the room exceeds the value set on the sensor of 60-90%, the fan will automatically turn on and will continue to operate until the humidity returns to normal, then the fan works out the time set on the timer and turns off
Technical characteristics
| Option | Size |
| Voltage, V | 230 |
| Current frequency, Hz | 50 |
| Power consumption, W | 9.3 |
| Maximum air flow, m3/h | 148 |
| Current, A< /strong> | 0.06 |
| Noise level at a distance 3 m, dB(A) | 31 |
| Weight, kg< /strong> | 0.69 |
| Protection | IP 34 |
| Pipe size, mm | 125 |
Dimensions
| ?D | B | H | L | L1 |
| 125 | 176 | 140 | 114 | 13 |
Connection diagram
Fan from external switch
The fan turns on with the light
The fan can also operate in a mode where it turns on only when the humidity level is exceeded. In this case, it is necessary to supply only the constant phase to terminal L. The fan will turn on when the set humidity value is exceeded, after reaching the required humidity level, it will run for a while according to the timer and turn off.
Application
- < li>Designed for periodic or continuous exhaust ventilation of toilets, bathrooms, shower cabins, kitchens and other premises
- Low noise level - 31 dB(A)
- Mounted in a ventilation shaft or in the ceiling or a wall with an air duct with a diameter of 125 mm (not included in the delivery, ordered separately if necessary)
Design
- The fan impeller and its housing are made of high-quality durable plastic . The plastic is inert to sunlight
- Due to the improved design of the fan impeller, the engine life is increased and the noise characteristics are reduced*
- The fan is equipped with a mesh to prevent insects from getting inside
- Degree motor protection IP 34.
*Silent fans only size 100 mm (Silent 100 s modifications), fans of this size - Silenta 150 have higher performance and a higher noise level - 31 dB(A).
Motor
- Reliable motor with minimal power consumption of 9.3 W
Motor
- Reliable motor with minimal power consumption of 9.3 W
- The engine does not require maintenance, continuous operation is allowed
- Built-in overheating protection.
Installation features
- Fan installed directly into the ventilation duct of the ventilation shaft of the room. If necessary, it is possible to use an additional air duct (flexible or plastic).
- The fan is attached to the wall or ceiling using screws
- Installing the fan is a simple procedure accessible to everyone
An example of installing a Vents 125 Silenta STN fan in an apartment
Fan passport
Video connection and installation of Vents Silenta-S fan
