The Vents VUE2 200 P unit is equippedwith two recuperators made of polymerized paper. The Vents VUE2 suspended supply and exhaust unit is a completely finished ventilation device that provides fresh air supply and exhaust air removal with a nominal capacity of 220 m3/h. At the same time, this model ensures partial transfer of moisture from the exhaust air to the supply air in two plate recuperators.
The units are used in ventilation and air conditioning systems for premises for various purposes. They feature a very low noise level due to the placement of fans between two heat exchangers. Designed for indoor installation and connects to round ducts with a nominal diameter? 125 mm.
House
The body of the Vents VUE2 200 P installation is made of aluminum-zinc steel. Thermal and sound insulation is made of foamed polypropylene 10 mm thick.
Filter
To filter the supply and exhaust air, the unit uses two pocket filters with a cleaning degree of G4.
Fans
The unit is equipped with supply and exhaust centrifugal fans with backward-curved blades and a built-in protection thermostat with automatic restart. Electric motors and impellers are dynamically balanced in two planes.
Recuperators
Recuperators made of polymerized paper transfer sensible and latent heat from one air flow to another. They are frost-resistant and do not produce condensation. Installations with this type of recuperator are recommended for use in rooms equipped with air conditioning.
The VUE2 200 P installation uses two cross-current recuperators made of polymerized paper.
Installation design
installation consist of?>
Control and automation
The installation is equipped with a switch that allows you to select one of three modes for constant unit operation: standby mode, low (LOW) or medium (MED) speed.
A CO2 sensor can be connected to the installation (not included in the delivery package). When the gas concentration increases, it will switch the unit from constant operation to maximum speed (HIGH).
A speed switch P3-1-300 (A3) can be connected to the unit to turn the unit on/off, as well as select low (LOW), medium (MED) or high (HIGH) speed.
To prevent the recuperator from freezing during the cold season, the unit is equipped with an active protection system. The temperature sensor stops the supply fan, while the warm exhaust air warms up the recuperators. The supply fan then turns on and the unit continues to operate as normal.
Installation
The installation is designed for suspended ceiling installation and can be installed on a balcony, pantry, basement, attic and other auxiliary rooms. The unit can also be installed in main rooms directly to the ceiling, behind a suspended ceiling or installed in a ceiling niche. Access for service from the bottom panel.
Specifications
| Parameter | Value |
| Voltage, V | 230 |
| Current, A | 0.58-0.68 |
| Current frequency, Hz | 50 |
| Maximum power, W | 67-142 |
| Productivity, m3/h | < td style='text-align: center,'>80-220|
| < strong>Rotation speed, min-1 | 1120-2910 | < /tr>
| Noise level at a distance of 3 m, dB(A) | 20-36 |
| Maximum temperature of transported air, C | -25....+40 |
| Efficiency heat recovery,% | 89 |
| Size of connected air ducts, mm | 125 |
Dimensions
Diagram
Example of installation installation
Documentation
Warranty
The manufacturer guarantees normal operation of the device for two yearsfrom the date of sale, subject to compliance with the rules transportation, storage, installation and operation.
