The Vents VUE2 250 P EC unit is equipped with two heat exchangers made of polymerized cellulose.
The suspended air handling unit is a completely finished ventilation device that provides air supply and exhaust from rooms residential or commercial use. The nominal capacity of the installation is 257 m3/h, while the maximum consumption of the installation does not exceed 125 W. This model can also be mounted on a wall; no drainage is created in this installation.
Designed to connect to round ducts of nominal diameter? 125 mm
House
The body of the installation is made of aluminum-zinc steel. Thermal and sound insulation is made of foamed polypropylene 10 mm thick.
Filter
To filter the supply and exhaust air, the unit uses two pocket filters with a cleaning degree of G4.
Fans
The unit is equipped with supply and exhaust centrifugal fans with backward-curved blades and a built-in protection thermostat with automatic restart. Electric motors and impellers are dynamically balanced in two planes.
Recuperators
Recuperators made of polymerized paper transfer sensible and latent heat from one air flow to another. They are frost-resistant and do not produce condensation. Installations with this type of recuperator are recommended for use in rooms equipped with air conditioning.
The VUE2 250 P EC installation uses two cross-current recuperators made of polymerized paper.
Installation design
Control and automation
The installation is equipped with a built-in automation system and a multifunctional control panel (P3/010 T ) with LED indication. Also included in the package is a signal cable to connect the unit to the control panel. To prevent the recuperator from freezing during the cold season, the unit is equipped with an active protection system. The temperature sensor stops the supply fan, while the warm exhaust air warms up the recuperators. The supply fan then turns on and the unit continues to operate as normal.
The control panel performs the following functions:
- Turning the unit on/off,
- Selecting the ventilation mode: min., medium, max.
- Setting the minimum mode in a range of 7 preset levels. In this case, the average mode is automatically set to 80 m3/h above the minimum, but not higher than the maximum.
- Indication of the need to replace the filter.
Installation
The unit is designed for suspended ceiling or wall mounting and can be installed on a balcony, pantry, basement, attic and other auxiliary rooms. The unit can also be installed in main rooms directly to the ceiling, behind a suspended ceiling or installed in a ceiling niche. Access for service from the bottom panel.
Specifications
| Parameter | Value |
| Voltage, V | 230 |
| Current , A | 0.87 |
| Current frequency, Hz | 50 |
| Maximum fan power, W | 125 |
| Maximum productivity, m3/h | 257 < /strong> |
| Rotation speed, min-1 | 2930 | < /tr>
| Noise level at a distance of 3 m, dB(A) | 39 |
| Maximum temperature of transported air, C | -25....+60 |
| Heat recovery efficiency,% | 89 |
| Size of connected air ducts, mm | 125 |
Dimensional dimensions
Diagram
Example of installation installation
An example of installing an apartment ventilation system based on the Vents VUE2 250 P EC unit
Documentation
Warranty
The manufacturer guarantees the normal operation of the device in within two years from the date of sale, subject to compliance with the rules of transportation, storage, installation and operation.
