Tee 200/125 round ventilation is used to connect an air duct with a diameter of 200 mm to an air duct at a right angle with a diameter of 125 mm.
A galvanized steel tee is a shaped part designed for branching a line of air ducts (i.e., for branching one air flow into two or combining two flows into one). In order to connect various air ducts to each other and combine them into complex ventilation systems, special shaped products are used - tees.
Air ducts and fittings are made of galvanized steel with a thickness of: p=0.55 ( - 100-355 mm); p=0.7 ( - 400-800 mm); p=1.0 ( - 900-1600 mm). To ensure rigidity of air ducts with diameters greater than 315 mm, additional stiffening ribs (intermediate zig) are provided.
This material does not corrode. The element is manufactured with a safety margin, which will allow you to repeatedly disconnect and reattach the tee to the air duct or vice versa.
| Name | d1, mm | d2, mm | l1, mm | l2, mm | L, mm | H, mm | < td> |
| Tee 125 | 125 | 125 < /td> | 30 | 30 | 165 | 85 | 0.55 |
| Tee 150/125 | 150 | 125 | 30 | 30 | 165 | 95 | 0.55 |
| Tee 150 | 150 | 30 | 30 | 190 | 95 | < p align="center">0.55 | |
| Tee 200/125 | 200 | 125 | 30 | 30 | 165 | 120 | 0.55 |
| Tee 200/150 | 150 | 30 | 30 | 190 | 120 | < p align="center">0.55 | |
| Tee 200 | 200 | 30 | 30 | 240 | 120 | 0.55 | |
| Tee 250/125 | < td rowspan="4" width="47"> 125 | < td> 30 | 165 | 145 | 0.55 | ||
| Tee 250/150 | 150 | 50 | 30 | 190 | 145 | 0.55 | |
| Tee 250/200 | < td> 50 | 30 | 240 | 145 | 0.55 | ||
| Tee 250 < /p> | 250 | 50 | 50 | 290 | 145 | 0.55 | |
| 315 | 125 | 50 | 30 | 165 | 180 | 0.55 | |
| Tee 315/150 < /p> | 150 | 50 | 30 | 190 | 180 | 0.55 | |
| 200 | 50 < /p> | 30 | 240 < /p> | 180 | 0.55 | ||
| Tee 315/250 | 250 | 50 | 50 | 290 | 180 | 0.55 | |
| Tee 315 | 315 | 50 | 60 | 355 | 180 | 0.55 |
