For connection to an air duct with a diameter of 250 mm of an air duct at a right angle with a diameter of 200 mm.
The 250/200 tee for ventilation made of galvanized steel is a shaped part designed for branching a line of air ducts (i.e., for branching one air flow into two or combining two flows into one). In order to connect various air ducts to each other and combine them into complex ventilation systems, special shaped products are used - tees.
Manufacture of air ducts and products from galvanized steel to order:
In-house production of air ducts and products made of galvanized steel for aspiration ventilation systems and conditioning thickness 0.4 – 1 mm:
- Rectangular ducts (rectangular ducts);
- Shaped products (bends, half-bends, inserts, tees, transitions, etc.)
- We carry out selection, calculation of air ducts, design and provide technical consultations
< br>
| Name | d1, mm | d2, mm | l1, mm | l2, mm | L, mm < /p> | H, mm | p, mm |
| Tee 125 | 125 | 125 | 30 | 30 | 165 | 85 | 0.55 |
| Tee 150/125 | 150 | 125 | 30 | 30 | 165 | 95 | 0.55 |
| Tee 150 | 150 | 30 | 30 | 190 | 95 | 0.55 | |
| Tee 200/125 | 200 | 125 | 30 < /td> | 30 | 165 < /td> | 120 | 0.55 |
| Tee 200/150 | 150 | 30 | 30 | 190 | 120 | 0.55 | |
| Tee 200 | 200 | 30 | 30 | 240 | 120 | < p align="center">0.55 | |
| Tee 250/125 | 250 | 125 | 50 | 30 | 165 | 145 | 0.55 |
| Tee 250/150 | 150 | 50 | 30 | 190 | 145 | < p align="center">0.55 | |
| Tee 250/200 | 200 | 50 | 30 | 240 | 145 | 0.55 | |
| Tee 250 | < td> 50 | 50 | 290 | 145 | 0.55 | ||
| Tee 315/ 125 | 315 | 125 | 50 | 30 | 165 | 180 | 0.55 |
| Tee 315/150 | < td> 50 | 30 | 190 | 180 | 0.55 | ||
| Tee 315/ 200 | 200 | 50 | < td width="48"> 240 | < td width="52"> 0.55 | |||
| Tee 315/250 | 250 | 50 | 50 | 290 | 180 | 0.55 | |
| Tee 315 | 315 | 50 | 60 | 355 | 180 | 0.55 |
