Vents Flexivent 1001160/75x10 manifold is used to connectten air ducts? 75 mmto the outlet of the fan or air handling unit? 200 mm.
Round ducts are connected using Flexivent flanges (supplied separately). Flange? 199, to which the fan is connected, is equipped with a rubber seal.
Material: steel with aluminum-zinc coating with internal sound insulation
Dimensions< /h3>
| D< /td> | L | A< /strong> | H | |
| Dimensions, mm | 199 | 500 | 600 | 302 |
Pressure loss and air flow
| Flow , m3/h | Number of channels | < td class='text-center'>Inflow loss, PaExhaust loss, Pa | |
| 30 | 1 | 2.6 | 1.6 |
| 60 | 2 | 3.0 | 1.9 |
| 90 | 3 | 3.5 | 2.4 |
| 120 | 4 | 4.3 | 3.1 |
| 150 | 5 | 5.4 | 4.0 |
| 180 | 6 | 6,6 | 5, 1 |
| 210 | 7 | 8.1 | 6.4 < /td> |
| 240 | 8 | 9.9 | 8.0 |
| 270 | 9 | 11.8 | 9.7 |
| 300 | 10 | 14.0 | 11.6 |
Installation
For To distribute air through the channels, it is necessary to use flanges that are inserted into the openings of the manifold. The channels are attached to such a flange using a lock on the flange. If some holes in the manifold will not be used, then they are blocked with plugs with a seal (purchased separately).
Collectors can be installed under the ceiling; in this case, the main air duct from the unit or fan is connected from below.
Also, such a collector can be mounted on the floor; in this case, the channels are connected from below.
