Why buy from us?
Lorem Ipsum is simply dummy text of the printing and typesetting industry.
Ask a Question About This Product
- Availability: 99
- Brand: Domis
- Model: 952811661
- Weight: 3.00kg
- UPC: PACK_60_RADI
Would you like to mechanize your manual roller shutters ? Choose our complete set of radio motorization tube + motor + remote control . Operate the shutter simply with the included remote control. Practical, there is no need to replace the entire roller shutter, whatever it is (compatible with Renovation blinds and traditional shutters). Just open the trunk, then drop the old axle before replacing it. That's all!
Determine compatibility with your roller shutters
To find out if your roller shutters are compatible with a set of radio-controlled axles, make sure that:
- The previous axis has a diameter of 60 mm and a length from 640 to 3500 mm.
- The stored power is sufficient (see the calculation formula below)
* Estimated weight of the bar: PVC 4 kg/m2, aluminum 4.5 kg/m2, wood 11 kg/m2.
If your roller shutters weigh:
- Up to 20 kg: suitable for 10 Nm
- Up to 40 kg: Suitable for 20 Nm
- Up to 60 kg: suitable for 30 Nm
Is the capacity of the package selected by width insufficient? Choose a longer length, you will not use an additional telescopic axis.
The composition of packages of radio motor axles ø60 mm
Package of shafts ø60mm - 1500mm
- 1 - Octagonal axis ø60 mm - 1500 mm length can be cut (x1)
- 2 - Tube end ø60 mm (x1)
- 3 - Rotary plate with pin ø12 mm 75 x 75 mm (x1)
- 4 - Engine support 005006
- 5 - T-shaped apron clips (x3)
- 6 - unidirectional radio motor ø45 mm - length 595 mm - 10 Nm (x1)
- 7 - Adaptation wheel and crown for octagonal axis 60 mm (x1)
- 8 - Stylus for adjusting limit switches (x1)
- 9 - Self-tapping screws (x3)
- 10 - AVOSDIM 005203 1-channel remote control (x1)
Package of shafts ø60mm - 2500mm
- 1 - Octagonal axis ø60 mm - 1500 mm length can be cut (x1)
- 2 - 1500mm telescopic octagonal tube with cutting capability (x1)
(depth 500 mm) - 3 - Tube end ø60 mm (x1)
- 4 - Rotary plate with pin ø12 mm 75 x 75 mm (x1)
- 5 - Engine support 005006
- 6 - T-shaped apron clips (x5)
- 7 - unidirectional radio motor ø45 mm - length 595 mm - 20 Nm (x1)
- 8 - Adaptation wheel and crown for octagonal axis 60 mm (x1)
- 9 - Stylus for adjusting limit switches (x1)
- 10 - Self-tapping screws (x3)
- 11 - AVOSDIM 005203 1-channel remote control (x1)
Package of shafts ø60mm - 3500mm
- 1 - Octagonal axis ø60 mm - 1500 mm length can be cut (x1)
- 2 - 1500 mm telescopic octagonal tube that can be cut (x2)
(corresponding recesses of 500 mm) - 3 - Tube end ø60 mm (x1)
- 4 - Rotary plate with pin ø12 mm 75 x 75 mm (x1)
- 5 - Engine support 005006
- 6 - T-shaped apron clips (x7)
- 7 - unidirectional radio motor ø45 mm - length 625 mm - 30 Nm (x1)
- 8 - Adaptation wheel and crown for octagonal axis 60 mm (x1)
- 9 - Stylus for adjusting limit switches (x1)
- 10 - Self-tapping screws (x3)
- 11 - AVOSDIM 005203 1-channel remote control (x1)
Working and technical data of the radio engine
- Diameter: 45mm
- Engine torque: 10 Nm, 20 Nm or 30 Nm
- Raised Weight:
- 10 Nm: 20 kg
- 20 Nm: 40 kg
- 30 Nm: 60 kg
- Rotation speed: 15 rpm
- Power: 230 V
- Power Supply: 50 Hz
- Cell Capacity: 22 rounds
- Dust and moisture protection: IP44
