Buy Garage sectional doors made of aluminum sandwich panels at Factory Prices

Sectional doors guarantee a high level of security, excellent protection against hacking and penetration of intruders, as well as a long period of use. In order to increase the level of noise and thermal insulation, a seal is installed along the perimeter of the web. Sectional structures have a number of indisputable advantages (composite fabric and steel hinges), the presence of which makes them more convenient and functional in comparison with other types of gates. At the request of the customer, sectional structures can be equipped with viewing windows and a gate, as well as an LED lighting system.

Sectional doors

Sectional doors have recently become more and more popular with customers, due to their practicality, ergonomics, reliability and relatively low cost. Gates of this type are a special type of barrier used to protect openings of various types. Sectional doors are a structure of interconnected "sandwich panels", tightly adjacent to each other and moving along the guides along the walls, due to which the gate is opened and closed. At the same time, the gate leaf rises up with the help of automation, being placed in a plane parallel to the ceiling of the room. These gates have undeniable advantages: they do not require additional space in front of the doors; designed for a large number of cycles, these gates perfectly withstand active operation; resistant to aggressive weather conditions; protect the premises from unauthorized entry; easy to operate due to the equipment of an automatic opening system; aesthetically attractive due to the use of materials of various colors, textures and drawings.

Where are they installed?

Sectional doors can be installed both in industrial premises (warehouses, industrial workshops, car washes, shopping malls) and for garage equipment in private homes. Depending on the purpose of the room where the gates of this type will be operated in the future, their technical characteristics will also be slightly different.

In this regard, sectional doors can be represented by the following two groups:

• Gates intended for industrial use premises (production and warehouse premises);
• Sectional doors of the garage series.

Garage sectional doors have proven themselves well in private homes, underground Parking lots of apartment buildings. In this case, the maximum height of the opening where the future gate will be installed will be 3 meters, which is sufficient for the passage of any passenger car. At the request of the customer, the gates can be made of panels with various external characteristics (material color, texture), the heat-conducting properties of materials, strength and safety are also taken into account. The variety of materials used by PegolasVIP specialists for the manufacture of sectional doors will allow you to design gates that perfectly match the appearance of your home, emphasize the taste, respectability and individuality of the owner.

Industrial sectional doors can have a height of up to 6 meters and a seven-meter width. At the same time, all technological components of the gate have a reinforced structure and guarantee reliability and long service life in industrial premises.

The basic equipment of your future gates can be supplemented with: a built-in gate, an alarm system, an automatic drive, an observation window, etc.

Top 10 reasons to choose

Gate customers in Spain and all over the world often choose a similar design. Sectional type lifting gates have many advantages:

1. Durability and reliability. ALUTECH sandwich panels have a thickness of up to 45 mm and are made of stainless or galvanized steel sheets and a layer of thermal insulation between them. The gate is structurally protected from burglary. The surface is resistant to precipitation, temperature jumps, scratches
2. Compactness. When there is no place for sliding or swing gates in a warm garage or in front of the garage, the sectional type is an alternative choice
3. They keep the heat well. The thermal insulation of the panels and the entire structure is comparable to the effect that a brick wall with a thickness of 60 centimeters gives. The owner saves on heating the garage for all the years of service of the lifting gate
4. Durability. The springs of the ALUTECH sectional doors are designed for 25 thousand working cycles. This is enough for 17 years of service, if you raise and lower the canvas four times every day
5. Convenient to use. The spring balancing mechanism is adjusted so that the canvas can be easily lifted and lowered down by hand. Automatic gates are controlled remotely – by pressing a button on the keychain
6. Safety. The protective mechanisms of ALUTECH are designed and manufactured according to the safety standards of the European Union EN 12604, EN 12453, EN 12424, EN 12425, EN Children are protected from pinching fingers, the car is protected from unauthorized lowering of the canvas
7. Noiselessness. Rolling bearings ensure quiet and smooth operation.
Pleasing in appearance. 2 textures, 5 types of panels, 10 standard colors allow you to harmoniously solve the exterior of almost every house. If this is not enough, the designer has at his disposal painting in 200+ shades of color according to the RAL and DB catalogues, as well as drawing (for the Prestige series)
8. Options. A gate, windows, bolt locks, ventilation grilles and other elements complement the standard equipment for the convenience of the customer
9. Quick installation. Two days or a little more are required by the specialists of PegolasVIP