General Airstage V-III AJG090LALBH outdoor unit, microclimate in multi-story buildings
The V-III series VRF system from TM FUJITSU is a large multi-zone system that provides efficient air conditioning in multi-story buildings and private homes. The system features a laconic modern design and a wide range of models with a capacity from 8 to 54 hp in 2 hp increments, as well as the ability to connect up to 64 indoor units. The total capacity of the connected indoor units can reach 150%.
A high coefficient of performance (COP) for any combination of units is achieved thanks to unique technologies, including a special heat exchanger design, a powerful DC inverter compressor and a large-diameter fan. The length of the pipe line of 1000 m and the length of the route from the first branch to the most remote indoor unit up to 90 m make the VRF TM FUJITSU system easy to design and suitable for any building layout.
High static pressure of 82 Pa allows you to connect an additional air duct to the outdoor unit, which makes it possible to install outdoor units in technical rooms of high-rise buildings. A comfortable microclimate in the room is maintained even during oil return, since the system continues to operate.
General Airstage V-III AJG090LALBH Outdoor Unit, Microclimate in Multi-Story Buildings
- Excellent Energy SavingsInverter Heat Pump: High Energy Savings in Both Cooling and Heating Thanks to All DC Inverter Technology to Maximize Seasonal Efficiency.
- Easy Installation and MaintenanceEasy connection and flexible communication between units make our units and their maintenance easy to operate even in large ground-based systems.
- High Static Pressure of 82 PaThe outdoor unit can have an air exhaust duct with a static pressure of up to 82 Pa. This allows the outdoor unit to be installed inside the machine room and have the ability to exhaust.
- Advanced Operation ControlWhen the units are connected to each other, the various compressors operate in a complex manner. Efficiency is greatly improved by the operation of the rotary compressor at low speed, distributing the force.
- Ideal Heat Exchanger ControlThe heat exchanger is divided into 2 parts: upper and lower. Heat exchange efficiency is increased by optimal management of the refrigerant, which is distributed to the upper part of the heat exchanger, where the incoming air flow is greater.
Maximum efficiency in every operation
All our combinations have maximum technology and efficient consumption thanks to our
energy coefficients.Some of the benefits are possible thanks to our exclusive air access design to the heat exchanger, our highly efficient DC Twin Rotary compressor and our innovative design that increases the effective exchange surface by up to 1.7 times.
