Ventoxx Slim Line recuperator with Twist control, for installation in buildings with thin walls, 5 speeds, 17 operating modes
Ventoxx Slim Line is an effective solution for organizing supply and exhaust ventilation in buildings with thin exterior walls, including buildings made of SIP-panels. Thanks to a special compensation box, the device is reliably installed in partitions from 150 mm, while providing full thermal insulation and protection from external factors such as precipitation and hypothermia. The design eliminates the formation of cold bridges, minimizing heat loss and maintaining comfort in the room.
The device is based on a high-tech ceramic heat exchanger manufactured in Germany, similar to the Ventoxx Comfort model. Recuperation efficiency reaches 91%. Ventoxx Slim Line operates in 17 modes and has 5 speed stages, providing a capacity of up to 68 m³/h. The maximum noise level is 41 dB, which is comparable to the sound of a normal conversation. Power supply can be from 230 V or 12 V, and power consumption in the operating range is only 1.6-2.75 W.
The unit is controlled by a Ventoxx Twist wall-mounted controller, supporting up to four units. The G3 class filter provides pre-cleaning of the air and does not require replacement - periodic cleaning once every three months is sufficient. A special feature of the model is the possibility of installation even with limited space, which makes it an optimal choice for small-sized houses and apartments.
Advantages of the model:
- Installation in walls from 150 mm thick
- Up to 91% heat exchange efficiency
- Low power consumption - up to 2.75 W
- Support for up to 4 devices with one controller
- Operates from 230 V or 12 V
Features:
. Recovery efficiency: 70-91%
. Temperature range: -20 to +50 °C
. Heat exchanger type: heat accumulator (Germany)
. Fan speed: 825-2205 rpm .
. Ventilation volume by speed:
1 - 21 m³/h
2 - 35 m³/h
3 - 50 m³/h
4 - 60 m³/h
5 - 68 m³/h
. Sound power level:
1 - 17 dB
2 - 22 dB
3 - 33 dB
4 - 38 dB
5 - 41 dB
. Number of modes: 17
. Number of speeds: 5
. Power supply: 230 VAC or 12 VDC
. Power consumption: 1.6-2.75 W
. Protection class: fan IP33, control IP20, filter G3
. Duct diameter: at least 235 mm
. Placement method: horizontally, in an external wall
. Dimensions:
- Set pipe: from 300 mm, Ø 226 mm
- Inner cover: Ø 240 mm
- Outer cover: 290×280 mm
Ventoxx Slim Line recuperator is a reliable, energy efficient and compact solution for organizing ventilation in houses with limited wall thickness. You can order the model in the online store Domis.pro.
| Main characteristics | ||
| Temperature range | -20 to +50 | |
| High-tech heat exchanger type | high-tech heat accumulator (Germany) | |
| Rpm, rpm | 825/2205 | |
| Good type | Recuperator | |
| Specifications | ||
| Diameter, mm | not less than 235 | |
| Protection class | Fan IP 33 Control IP 20 Filter G3 | |
| Number of speeds in reverse | 5 | |
| Voltage V, Hz | 230 VAC or 12 VDC | |
| Maintenance | The filter does not need to be replaced. The heat accumulator cartridge and filter should be checked for cleaning every 3 months. | |
| Ventilation capacity, m?/h | 1 speed - 21 2 speed - 35, 3 speed - 50, 4 speed - 60, 5 speed - 68 | |
| Method of placement | horizontal placement in the outer wall | |
| Recuperation efficiency, % | 70-91 | |
| General characteristics | ||
| Number of modes | 17 | |
| Power consumption, W | 1,6-2,75 | |
| Dimensions, mm | Set tube minimum length 300 mm Diameter - 226 mm Inner cover: Diameter - 240 mm Outer cover: height - 290 mm Width - 280 mm | |
| Sound power level, dB(A) | 1 speed - 17, 2 speed - 22, 3 speed - 33, 4 speed - 38, 5 speed - 41 |
