This fan is equippedwith a timer and a motion sensorwith a detection angle of 100°. If the sensor detects movement in its coverage area, the fan will automatically turn on and continue operating according to a timer from 2 to 30 minutes. Detection range up to 4 meters (detection angle max. 100°).
Vents 150 Silenta MTP fan is an exhaust fan used for ventilation of domestic and commercial small premises. It is built into the ventilation shaft; if there is no possibility of direct connection to the shaft, it is possible to use a short-length air duct with a diameter of 150 mm.
Application
- Continuous or periodic exhaust ventilation of bathrooms, showers, kitchens and other domestic premises.
- Ventilation of rooms with high noise level requirements.
- For installation in ventilation shafts or connection to air ducts.
- For installation with 100, 125 and 150 mm air ducts.
- Modern design and aesthetic appearance.
- The housing and impeller are made of high-quality and durable ABS plastic, UV-resistant.
- Design impeller allows you to increase the efficiency of the fan and the service life of the motor.
- The special design of the fan and motor ensures its silent operation.*
- Protection degree IP 34.
*Silent fans are only standard size 100 mm (Silenta 100 with modifications), fans of this standard size - Silenta 150 have greater performance and higher level noise - 33 dB(A).
Motor
- Reliable motor with minimal power consumption of only 5.5 W (for 100 mm diameter).
- Designed for continuous operation and maintenance-free .
- Equipped with overheating protection.
Technical characteristics
| Option | Value |
| Voltage, V | 230 |
| Current frequency, A | 50 |
| Power consumption, W | 20 |
| Maximum air flow, m3/h | 242 |
| Current, A | 0.14 |
| Noise level at a distance of 3 m,dB(A) | 33 |
| Weight, kg | 0.82 |
| Protection, class | IP34 |
Overall dimensions
| D | B | H | L | L1 |
| 150 | 206 | 182 | 106 | 26 |
Aerodynamic characteristic
Dependence of fan performance from pressure
Installation features
- Fan is installed directly in the opening of the ventilation shaft.
- When the ventilation shaft is located remotely, it is possible to use flexible air ducts. The air duct is connected to the fan outlet flange using a clamp.
- Attached to the wall with screws.
- Can be used for ceiling mounting.
Example installation
Connection diagram
Connection diagram for a fan without a built-in switch to the network
